

DC Electronic Load
- Size
- 69.9 × 88.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 23
- Pads
- 90
- Tracks, vias
- 173, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
DC Electronic Load is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board of 69.9 × 88.3 mm with 34 parts on 23 nets, routed with 173 tracks and 0 vias.
It is built around the LM358, TIP112 and TL431. Its parts include 9 resistors, 7 connectors, 6 capacitors, 2 ICs and 2 diodes. It belongs with the power boards of this library.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTIP112
TO-220-3L-55℃~+150℃ 100V 12000 1mA 2.5V@2A,8mA 2A 5V NPN TO-220-3L Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Darlington TransistorsTL431
SOT-23-20℃~+85℃ 150mA 1mA 2.5V~36V 50ppm/℃ Adjustable Parallel Temperature compensation control ±1% SOT-23 Voltage Reference ROHSGuangdong HottechVoltage Reference
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Custom Footprint:Cap_UnPol_P3 | C3, C5, C6 |
| 3 | 120Ω | Custom Footprint:Resistor-0.25W | R1, R2, R3 |
| 3 | MOSFET | Custom Footprint:Pin_Header_Straight_1x03 | J3, J4, J5 |
| 2 | 0.1Ω | Custom Footprint:Resistor-10W | R8, R9 |
| 2 | 100Ω | Custom Footprint:Resistor-0.25W | R6, R7 |
| 2 | 22uF | Custom Footprint:Cap_Pol_Radial_D8_P2 | C1, C4 |
| 1 | 100kΩ | Custom Footprint:Resistor-0.25W | R4 |
| 1 | 100uF | Custom Footprint:Cap_Pol_Radial_D10_P3 | C2 |
| 1 | 11V | Custom Footprint:1N4148 | D2 |
| 1 | 1N4148 | Custom Footprint:1N4148 | D1 |
| 1 | 2.2kΩ | Custom Footprint:Resistor-0.25W | R5 |
| 1 | 2N3904 | Custom Footprint:TO-92_Inline_Wide | Q1 |
| 1 | 50kΩ | Custom Footprint:Potentiometer_Large | RV1 |
| 1 | Fan | Custom Footprint:Power_Socket_2.1mm | J2 |
| 1 | LM358 | Custom Footprint:IC_PDIP_8pin | U2 |
| 1 | PSU_IN | Custom Footprint:Terminal_Block-5mm | J7 |
| 1 | Power | Custom Footprint:Power_Socket_2.1mm | J1 |
| 1 | Switch | Custom Footprint:Pin_Header_Straight_1x03 | J6 |
| 1 | TC962 | Custom Footprint:IC_PDIP_8pin | U1 |
| 1 | TIP112 | Custom Footprint:TO-220_Neutral123_Vertical | Q2 |
| 1 | TL431 | Custom Footprint:TO-92_Inline_Wide | Vref1 |
The 30 most common of 34 parts.
More from koson/KicadProject
12- 2 layers150 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers190.5 × 88.9 mm

- 2 layers75 × 50 mm

- 2 layers100 × 100 mm

- 2 layers95 × 60 mm

- 2 layers146.1 × 69.9 mm

- 2 layers112.5 × 60 mm

- 2 layers88.9 × 48.9 mm

- 2 layers62.2 × 55.9 mm

Similar boards
- 2 layers31 × 130 mm

Handheld unit old3
zegarac/Photosynq-hardware
Photosynq KiCad files for the main board and other associated hardware
127 parts1GPL-3.0 - 2 layers64.9 × 47.3 mm

Universal battery charger
ArthorH/PD-UniCharger
Universal power delivery charger with battery reverse polarity protection
64 partsCERN-OHL-P-2.0 - 2 layers195 × 65 mm

- 2 layers148.6 × 82 mm

Main dj filter fx
yminp/dj-filter-fx
A voltage-controlled DJ filter unit with LFO-like envelope function
164 parts - 2 layers54 × 47 mm

- 2 layers268.9 × 442.5 mm

- 2 layers152.4 × 86.4 mm

- 4 layers178.9 × 131.8 mm

UVerter
owntech-foundation/micro-inverter
A repository to do collective work on an open source micro-inverter.
402 parts118CERN-OHL-S-2.0
Questions
How big is the DC Electronic Load PCB?
It measures 69.9 × 88.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DC Electronic Load use?
34 parts, built around the LM358, TIP112 and TL431. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC Electronic Load KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is Commercial/DC Electronic Load/Revision 2/DC-Electronic-Load.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC Electronic Load design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.