2 layers72.6 × 106.2 mm
2 layers58.4 × 90.2 mm
ICab
koson/ICab- Size
- 58.4 × 90.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 60
- Pads
- 260
- Tracks, vias
- 304, 21
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Nov 2021
- Updated
- 16 Apr 2019
Overview
ICab is an open-source printed circuit board by koson, from the koson/ICab repository on GitHub. It is a 2-layer board of 58.4 × 90.2 mm with 95 parts on 60 nets, routed with 304 tracks and 21 vias.
It is built around the PIC18F2550-I/SP, L7805 and IRFZ44N. Its parts include 33 resistors, 21 diodes, 14 capacitors, 10 connectors and 5 transistors. It belongs with the PIC boards of this library.
Main components
3
PIC18F2550-I/SP
SPDIP-28-40℃~+85℃ 10bit 24 256Byte 2KB 32KB 4.2V~5.5V 48MHz 8 Bit Built-in FLASH PIC SPDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRFZ44N
TO-220110pF 130W 18mΩ@10V 39nC@10V 430pF 4V 50A 60V 880pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R16, R17, R18, R19, R20 +2 |
| 13 | LED | LEDs:LED_0603_HandSoldering | D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, Rx, Tx |
| 10 | 511 | Resistors_SMD:R_0603_HandSoldering | R14, R15, R21, R22, R23, R24, R25, R26, R27, R29 |
| 9 | 10µ | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C4, C7, C9, C11, C12, C13, C14 |
| 5 | 1.2k | Resistors_SMD:R_0603_HandSoldering | R28, R30, R31, R32, R33 |
| 5 | D | Diodes_THT:D_T-1_P5.08mm_Horizontal | D1, D4, D5, D6, D7 |
| 5 | IRFZ44 | TO_SOT_Packages_THT:TO-220_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 3 | 1µ | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C6, C8, C10 |
| 3 | D | Diodes_THT:D_T-1_P10.16mm_Horizontal | D8, D9, D10 |
| 2 | 100n | Capacitors_SMD:C_0603_HandSoldering | C3, C5 |
| 2 | Output | Housings_DIP:DIP-18_W7.62mm | U1, U3 |
| 1 | 12V | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | 12V input |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | 16MHz |
| 1 | D1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J10 |
| 1 | D2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J11 |
| 1 | D3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J12 |
| 1 | D4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J13 |
| 1 | D5 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J14 |
| 1 | L7805 | TO_SOT_Packages_THT:TO-220_Vertical | U4 |
| 1 | LOGO | KiCadLogos:galenus80_50 | G*** |
| 1 | LOGO | panda:LOGO3 | G*** |
| 1 | OUT | Connectors_Molex:Molex_PicoBlade_53047-0410_04x1.25mm_Straight | IO |
| 1 | PGM | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | PGM |
| 1 | PIC18F2550 | Housings_DIP:DIP-28_W7.62mm | U2 |
| 1 | S1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J8 |
| 1 | S2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | S3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J5 |
| 1 | S4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | S5 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | SERIAL | Connectors_Molex:Molex_PicoBlade_53047-0410_04x1.25mm_Straight | Serial |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | Reset |
Questions
How big is the ICab PCB?
It measures 58.4 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ICab use?
95 parts, built around the PIC18F2550-I/SP, L7805 and IRFZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICab KiCad files?
From the koson/ICab repository on GitHub, at the commit this page was made from: the board is PCB/iCab.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICab design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.
More from koson/ICab
1Similar boards
- 2 layers99.7 × 49.5 mm
- 2 layers
- 2 layers100 × 50 mm
Pinguino-2550
MefhigosetH/pinguino-boards
Personal repository of schematics and boards related to Pinguino Project.
28 parts3Unlicense - 2 layers69.2 × 48.3 mm
- 2 layers69.9 × 79.4 mm
10x10cm Pinguino SMD-2550
fandres/pinguino_SMD-2550
PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550
114 parts - 2 layers75.2 × 72.9 mm
- 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers54.6 × 85.1 mm
