
CTS SAT-1-Burnwire PCB
CalgaryToSpace/CTS-SAT-1-DCLB-Burnwire-PCB
CTS-SAT-1 burnwire driver PCB for the Deployable Composite Lattice Boom (DCLB)

ESP32-MODBUS RS485-SHIELD is an open-source printed circuit board by koson, from the koson/ESP32-MODBUS-RS485-SHIELD repository on GitHub. It is a 2-layer board of 55 × 29.4 mm with 27 parts on 48 nets, routed with 154 tracks and 41 vias.
It is built around the SN75176AD, RS485 and SMAJ6.5CA, with the WST3400S and MF-MSMF050-2 among its other parts. Its parts include 9 resistors, 5 diodes, 4 connectors, 3 transistors and 3 fuses. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Library:R_0603_1608Metric | R38, R39, R40, R41, R42, R43 |
| 3 | SMAJ6.5CA | Library:D_SMA | D33, D34, D35 |
| 3 | WST3400S | Library:SOT-23 | Q17, Q18, Q19 |
| 2 | 470R | Library:R_0603_1608Metric | R45, R47 |
| 2 | Conn_01x19 | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J1, J2 |
| 2 | MF-MSMF050-2 | Library:Fuse_1812_4532Metric | F1, F2 |
| 1 | 100nF | Library:C_0603_1608Metric | C3 |
| 1 | 10uF | Library:CP_EIA-3528-21_Kemet-B | C5 |
| 1 | 120 | Library:R_0603_1608Metric | R36 |
| 1 | Conn_01x02 | Library:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | GREEN | Library:LED_0603_1608Metric | D36 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F3 |
| 1 | RED | Library:LED_0603_1608Metric | D37 |
| 1 | RS485 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J9 |
| 1 | SN75176AD | Library:SO08 | U11 |

CalgaryToSpace/CTS-SAT-1-DCLB-Burnwire-PCB
CTS-SAT-1 burnwire driver PCB for the Deployable Composite Lattice Boom (DCLB)

condevtion/i2c-pps-hw
Schematics for Programmable DC-DC Power Supply with I2C Interface

ebixs/smart-gas-meter-iot
The board plugs onto the carrier board's modem header J6 (carrier v0.2, hardware/kicad/) with a socket J1 on its underside, pin for pin: 1 MODEMVIN · 2 GND · 3 MODEMTXD · 4 MODEMRXD · 5 MODEMEN · 6 MODEMRESET · 7…

ta007403/PHYLAX
PHYLAX (Greek φύλαξ, "guardian") is an open-source, Bitcoin-only hardware wallet built around a simple idea: no black-box chips, no wireless radios, no telemetry, and firmware you can read and verify yourself.


MR-DOS/MWGEN-G1
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.


ay2718/RadomeMotorController
The Radome CAN protocol is very simple. Send azimuth commands to address 0x1 and elevation commands to address 0x2. Azimuth and elevation reply back from addresses 0x101 and 0x102 respectively.
It measures 55 × 29.4 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the SN75176AD, RS485, SMAJ6.5CA and WST3400S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koson/ESP32-MODBUS-RS485-SHIELD repository on GitHub, at the commit this page was made from: the board is ESP32-MODBUS-RS485-SHIELD.kicad_pcb and its schematic ESP32-MODBUS-RS485-SHIELD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.