
RelayBoard
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

Ethernet passthrough is an open-source printed circuit board by korken89, from the korken89/ethernet-passthrough repository on GitHub. It is a 4-layer board of 66 × 44 mm with 53 parts on 134 nets, routed with 530 tracks and 8 vias.
It is built around the KSZ8863RLL and MIC5219-3.3YM5. Its parts include 26 capacitors, 13 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1u | passive:C_0402 | C1, C4, C5, C6, C7, C10, C11, C14, C17, C18, C19, C22, C23, C24, C25, C26 +2 |
| 8 | 1k | passive:R_0402 | R1, R2, R3, R4, R10, R11, R12, R13 |
| 6 | 22u | passive:C_0805 | C12, C13, C15, C16, C20, C21 |
| 4 | GREEN | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 2 | 10k | passive:R_0402 | R5, R8 |
| 2 | 2.2u | passive:C_0402 | C2, C3 |
| 2 | 4.7k | passive:R_0402 | R6, R7 |
| 2 | Ferrite_Bead_Small | passive:R_0402 | FB1, FB2 |
| 2 | RJ45_Amphenol_RJMG1BD3B8K1ANR | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J3, J4 |
| 1 | 11.8k | passive:R_0402 | R9 |
| 1 | 25 MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | Conn_01x04_Male | connectors:1x4_2.54mm | J2 |
| 1 | KSZ8863RLL | qfp:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32F407VETx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | tag-connect-swd | connectors:tag-connect_6pin_nolegs_swd | J1 |

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team



KhanKudo/diplomprojekt
HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24

Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf


relic-se/PicoSynth_Sandbox-hardware
Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.

luni64/mmStep
Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.
It measures 66 × 44 mm and has 4 copper layers, 1.6 mm thick.
53 parts, built around the KSZ8863RLL and MIC5219-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the korken89/ethernet-passthrough repository on GitHub, at the commit this page was made from: the board is ethernet-passthrough.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask korken89 before reusing the design.