

My rp2040
RP2040 board with USB-C, 8MB flash and 22 GPIOs
- Size
- 24 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 59
- Pads
- 192
- Tracks, vias
- 381, 50
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Mar 2024
- Updated
- 15 Mar 2024
Overview
My rp2040 is an open-source printed circuit board by kolontsov, from the kolontsov/my-rp2040 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 24 × 37 mm with 38 parts on 59 nets, routed with 381 tracks and 50 vias.
It is built around the RP2040, W25Q64JVXGIQ and AP2112K-3.3TRG1, with the 0402CG150J500NT, 2TJ412000HYGBC and B5817WS among its other parts. Its parts include 16 capacitors, 9 resistors, 4 connectors, 3 ICs and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
10RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q64JVXGIQ
XSON-8-EP(4x4)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 3ms 64Mbit SPI XSON-8-EP(4x4) NOR FLASH ROHSWinbond ElecNOR FLASHAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators0402CG150J500NT
040215pF 50V C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT2TJ412000HYGBC
SMD2520-4P-40℃~+85℃ 12MHz 150Ω 9pF Crystal Oscillator ±10ppm ±30ppm SMD2520-4P Crystals ROHSJYJECrystalsB5817WS
SOD-323-55℃~+150℃ 10A 1A 1mA@20V 20V 450mV@1A Independent SOD-323 Schottky Diodes ROHShongjiachengSchottky DiodesMF-FSMF050X-2
0603-40℃~+85℃ 0.8mm 1.6mm 100mΩ 1A 40A 500mA 500mW 6V 800mΩ 0603 Resettable Fuses ROHSBournsResettable FusesTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches19-213/Y2C-CQ2R2L/3T(CY)
0603-40℃~+85℃ 1.7V~2.3V 120° 20mA 585.5nm~591.5nm 591nm 60mW 90mcd~180mcd Water Clear Yellow 0603 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - DiscreteTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdMy-RP2040
A small RP2040 board, with USB-C, 8MB of flash, SWD interface, 22 GPIO, and a LED. Size: 24x37mm.
This board serves no special purpose other than being an exercise in designing an RP2040 board.
- Designed in KiCad 8, manufactured and assembled at JLCPCB, confirmed to work.
- Follows recommendation from the Hardware design with RP2040.
- Some footprints and 3D models are from my personal library.
- Uses design rules to match JLCPCB capabilities.
- Production files (Gerbers, BOM, and CPL) are generated with the help of the KiCad JLCPCB plugin.

Pinout

License
Creative Commons (CC0-1.0). For the license text, see LICENSE.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7, C8, C9, C10, C11, C12, C13, C14 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R9 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x14 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2, J3 |
| 1 | 12MHz 9pF | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 20V 1A | Diode_SMD:D_SOD-323 | D1 |
| 1 | 500mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BOOTSEL | Kolontsov:SW-SMD-TS-1088-AR02016 | SW2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RESET | Kolontsov:SW-SMD-TS-1088-AR02016 | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q64JVXG | Kolontsov:XSON-8_L4.0-W4.0-P0.80-TL-EP | U2 |
Similar boards
- 4 layers368.2 × 159.8 mm

- 4 layers44 × 44 mm

- 4 layers58 × 70 mm

Probelab
enkhbold470/kicad-projects
Five KiCad 10 boards (4- and 6-layer): ESP32-S3 industrial gateway, USB-C PD bench supply, RP2040 logic analyzer, FOC motor controller, iCE40 FPGA board.
88 partsCERN-OHL-S-2.0 - 2 layers26 × 32 mm

- 4 layers52.8 × 22.9 mm

- 2 layers60 × 60 mm

Arcboard stm32-mk2
christrotter/arcboard-stm32-mk2
Next iteration of the stm32f405 board; paradigm shift means new repo.
94 partsMIT - 4 layers43.2 × 17.8 mm

- 4 layers82 × 55 mm

Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1
Questions
How big is the My rp2040 PCB?
It measures 24 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the My rp2040 use?
38 parts, built around the RP2040, W25Q64JVXGIQ, AP2112K-3.3TRG1 and 0402CG150J500NT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the My rp2040 KiCad files?
From the kolontsov/my-rp2040 repository on GitHub, at the commit this page was made from: the board is my-rp2040.kicad_pcb and its schematic my-rp2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the My rp2040 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).