
OSMC Receiver
Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

A modular controller that can be configure to how you want to use it
OSMC Module Joystick V2 is an open-source printed circuit board by Koalaven, from the Koalaven/Open-Source-Modular-Controller repository on GitHub. It is a 4-layer board of 34 × 41 mm with 7 parts on 19 nets, routed with 97 tracks and 15 vias.
It is built around the 24LC02BT-I/OT and COM-09032. Its parts include 4 ICs and 1 resistor. It belongs with the keyboards and input boards of this library.
Using a modular, reconfigurable hardware architecture to create a customizable USB HID game controller.
The Open Source Modular Controller project is a fully modular and customizable gaming input system. Users can freely rearrange joysticks, buttons, and future input modules on a set of interchangeable receiver boards to build a layout that fits their gameplay style, ergonomic needs, or accessibility requirements.
The controller connects over USB and is recognized as a standard Human Interface Device (HID) with no additional drivers required.
The current prototype includes:
The system operates as a recognized USB gamepad on Windows. Some hardware issues were identified and corrected in updated revisions.
The repository is organized as follows:
Core system components include:
USB HID enumeration and report handling are implemented using TinyUSB. Modules communicate through standardized connectors to the controller board.
A full BOM including the ESP32‑S3 boards, connector sets, resistors, capacitors, PCBs, wire, and 3D‑printed components is provided in the documentation.
BOM
For the Enterprise Program at Michigan Tech there is a end of semester and project report for the project to summarize the progress of the project. Link
This project is supported by the Open Source Hardware Enterprise at Michigan Technological University.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 24LC02BT-I/OT | Library:SOT-23-5_MC_MCH | U2 |
| 1 | COM-09032 | Library:XDCR_COM-09032 | U4 |
| 1 | MCP3428x-xSL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | OSMC Module Board w/pins | Library:Module standard pin large | U1 |

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

Koalaven/Open-Source-Modular-Controller
A modular controller that can be configure to how you want to use it

tangles-0/cyberdeck-scout
// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…

oomlout/oomlout_oomp_project_bot_v_2

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project



Hex-4/glyph
[ a custom split keyboard for portably and comfortably interfacing with computing systems ]

Josh4minee/HEX-B12.V1
HEX-B12.V120 is a custom designed hexapod using mg996r servos and has it's theme based on the beloved bot B-12 from the popular video game STRAY.

shiva233/Project-Hermes
Project Hermes is a handheld "console" designed for people who already own gaming PCs so they can stream their games via SteamLink so they can take it anywhere for cheap!
It measures 34 × 41 mm and has 4 copper layers, 1.6 mm thick.
7 parts, built around the 24LC02BT-I/OT and COM-09032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Koalaven/Open-Source-Modular-Controller repository on GitHub, at the commit this page was made from: the board is Hardware/PCBs/module/OSMC_Module_Joystick_V2/OSMC_Module_Joystick_V2.kicad_pcb and its schematic Hardware/PCBs/OSMC_Receiver/Modules.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Koalaven before reusing the design.