Skip to the content
2 layers60.5 × 52 mm514 pcb, the printed circuit board in 3D

Sonic Flow senses the music around and visualize the waveform. The sensing device is responsible for detecting the music around.

Size
60.5 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
24
Pads
51
Tracks, vias
9, 8
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Jan 2025
Updated
12 Mar 2025

Overview

514 pcb is an open-source printed circuit board by knovvX, from the knovvX/TECHIN514_Project repository on GitHub. It is a 2-layer board of 60.5 × 52 mm with 7 parts on 24 nets, routed with 9 tracks and 8 vias.

It is built around the SPH0645LM4H-B. Its parts include 1 capacitor, 1 resistor, 1 IC, 1 diode and 1 switch.

Main components

1

README

README.md

TECHIN514_Project

Diyun Lu 2430741

Sonic Flow - A Music Visualization Device

Overview

Sonic Flow senses the music around and visualize the waveform. The sensing device is responsible for detecting the music around. And the display device will display the corresponding waveforms together with a part acting as a monotrome to display the bpm.

IMG_2700

Sensing Device

The sensing device is equipped with a microphone sensor, which is recording the sound waves and send it to display device. A bluetooth module of esp32 will handle this transmission, since in the application, these two devices should not be very far, so I chose bluetooth. Also the sound level will affect the brightness of the LED strip around the cube, louder the sound is, brighter the LED is.

sensing

Display Device

The display device is mainly displaying the waveform and the bpm of the music detected. BPM is displayed through the stepper-motor-driven gauge needle as a monotrome. Further ML will be embedded on the microncontroller to detect the emotion of the music and also display it on the OLED. A design of different kinds of waveforms will be enabled by a button to switch between different designs.

display

Connection Diagram

The connection of the two parts are shown below. They connect with each other through ESP32's Bluetooth module. And ESP32 is responsible for the control of other sensors.

diagram

Device Composition
DeviceSensor / ElementFunctionality
SensingSPH0645LM4H-BMicrophone
Sensing3.7V / ++?Battery
Display3.7V / ++?Battery
DisplaySSD1305(Long, for waves),https://www.adafruit.com/product/292,Adafruit OLED FeatherWing(Small, for displaying bpm)OLED
DisplayD6R90 F2 LFSButton
Display/SensingRGBLED
Displayhttps://www.adafruit.com/product/2424Stepper-motor-driven Gauge Needle
ESP32Bluetooth and control

Parts

7
QtyValueFootprintReferences
1APA102LED_SMD:LED_RGB_5050-6D1
1Battery_CellConnector_JST:JST_JWPF_B02B-JWPF-SK-R_1x02_P2.00mm_VerticalBT1
1C_PolarizedResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderC1
1R = 10kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1SPH0645LM4HSensor_Audio:Knowles_SPH0645LM4H-6_3.5x2.65mmMK1
1SW_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1
1~Seeed Studio XIAO Series Library:XIAO-ESP32S3-DIPU1

More from knovvX/TECHIN514_Project

1
  • 2 layers139 × 154 mm514 display, the printed circuit board in 3D

    514 display

    knovvX/TECHIN514_Project

    Sonic Flow senses the music around and visualize the waveform. The sensing device is responsible for detecting the music around.

    13 parts

Similar boards

  • 4 layers55 × 100.5 mmOSS Radio Hardware Design, the printed circuit board in 3D

    OSS Radio Hardware Design

    Arkos-Engineering/HT-15_hardware

    We can split this out into separate repos later, right now its very convenient to have everything here.

    256 parts72
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 2 layers36.4 × 16.1 mmMic, the printed circuit board in 3D

    Mic

    douggilliland/FPGA_Games

    FPGA Games Gathered from GitHub in one place

    9 parts23
  • 2 layers187 × 152 mmKiss masterboard, the printed circuit board in 3D

    Kiss masterboard

    squarewavedot/ledcubeelectronics

    LEDCube battery and masterboard electronics

    163 parts22
  • 2 layers43 × 43 mmBadge, the printed circuit board in 3D

    Badge

    oshwabadge2020/Badge-PCB

    Open Hardware Summit 2020 wrist-watch badge

    78 parts19
  • 2 layers50 × 50 mmNoisemeter, the printed circuit board in 3D

    Noisemeter

    CivicTechTO/tRacket-sensor

    Design files and source code for the tRacket noise sensor

    32 parts11
  • 4 layers102.4 × 27.5 mmGLARE, the printed circuit board in 3D

    GLARE

    RR-CREATOR/GLARE

    Glasses Linked Augmented Reality Engine

    102 parts10MIT
  • 2 layers104 × 104 mmAudio shield, the printed circuit board in 3D

    Audio shield

    LCAV/crazyflie-audio

    Code for recording audio on Crazyflie

    127 parts9MIT

Questions

How big is the 514 pcb PCB?

It measures 60.5 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 514 pcb use?

7 parts, built around the SPH0645LM4H-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 514 pcb KiCad files?

From the knovvX/TECHIN514_Project repository on GitHub, at the commit this page was made from: the board is 514_pcb/514_pcb.kicad_pcb and its schematic 514_display/514_display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 514 pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask knovvX before reusing the design.