
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Some experiments with small stm32f0's
Pcb f0test is an open-source printed circuit board by knielsen, from the knielsen/stm32f0_experiment_pcb repository on GitHub. It is a 2-layer board of 50 × 50 mm with 93 parts on 109 nets, routed with 1,007 tracks and 83 vias.
Its parts include 40 resistors, 15 capacitors, 12 diodes, 7 connectors and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 560 | Resistors_SMD:R_0603 | R3, R14, R15, R24, R25, R26, R27, R28, R29, R30, R33, R34, R35, R36, R37, R38 +3 |
| 14 | 100 | Resistors_SMD:R_0603 | R2, R4, R6, R7, R10, R11, R12, R13, R16, R17, R18, R19, R31, R32 |
| 12 | Led_Small | LEDs:LED_0603 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 7 | RGB | knielsenlib:RGB_0603_ALTPINOUT | LD1, LD2, LD3, LD4, LD5, LD6, LD7 |
| 5 | Jumper_NC_Small | Pin_Headers:Pin_Header_Straight_1x02 | JP1, JP2, JP3, JP4, JP5 |
| 4 | 100n | Capacitors_SMD:C_0603 | C1, C2, C8, C9 |
| 4 | 4.7u | Capacitors_SMD:C_0603 | C3, C4, C10, C11 |
| 3 | 510 | Resistors_SMD:R_0603 | R20, R21, R22 |
| 2 | 10k | Resistors_SMD:R_0603 | R39, R40 |
| 2 | 10n | Capacitors_SMD:C_0603 | C6, C15 |
| 2 | 1u | Capacitors_SMD:C_0603 | C5, C14 |
| 2 | 2.2u | Capacitors_SMD:C_0603 | C7, C13 |
| 2 | 47k | Resistors_SMD:R_0603 | R1, R23 |
| 2 | CONN_01X01 | knielsenlib:Touchpad_8mm | P7, P8 |
| 2 | CONN_02X05 | knielsenlib:pogopads_2x5_50mil_smd | P1, P6 |
| 2 | LP2985LV | TO_SOT_Packages_SMD:SOT-23-5 | U2, U5 |
| 2 | STM32F042GxU | knielsenlib:UFQFPN28_fixpad | U1, U4 |
| 1 | 47n | Capacitors_SMD:C_0603 | C12 |
| 1 | Battery | knielsenlib:Linx_BAT_HLD_001 | BT1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | P3 |
| 1 | CONN_02X05 | knielsenlib:pogopins_2x5_50mil | P5 |
| 1 | KNUSB | knielsenlib:10103594-0001LF | U3 |
| 1 | ferrite | Resistors_SMD:R_0603_HandSoldering | L1 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.



Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
It measures 50 × 50 mm and has 2 copper layers, 0.8 mm thick.
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the knielsen/stm32f0_experiment_pcb repository on GitHub, at the commit this page was made from: the board is pcb_f0test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask knielsen before reusing the design.