
Pcb ledtorus controller
knielsen/pcb_ledtorus_controller
Controller PCB for LED-torus - motor-controller, wireless communication, and PS2 controllers

KiCAD design of PCB for LED-torus 2
Pcb ledtorus 2 is an open-source printed circuit board by knielsen, from the knielsen/pcb_ledtorus_2 repository on GitHub. It is a 4-layer board of 149 × 149 mm with 280 parts on 736 nets, routed with 10,726 tracks and 1,178 vias.
It is built around the TLC5955DCA, JUMPER3 and SML-211UTT86, with the SML-211YTT86 among its other parts. Its parts include 45 capacitors, 15 ICs, 11 resistors, 7 connectors and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 192 | RGB_LED_SMALL | knielsenlib:RGB_0603 | LD1, LD10, LD11, LD100, LD101, LD102, LD103, LD104, LD105, LD106, LD107, LD108, LD109, LD110, LD111, LD112 +176 |
| 32 | 100n | w_smd_cap:c_0603 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C25, C29, C34, C35 +16 |
| 12 | TLC5955 | knielsenlib:TLC5955DCA | U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15 |
| 5 | 10k | w_smd_resistors:r_0805 | R2, R4, R8, R9, R11 |
| 5 | 2.2u | w_smd_cap:c_0805 | C23, C24, C26, C27, C28 |
| 2 | 1k | w_smd_resistors:r_0805 | R6, R7 |
| 2 | 22p | w_smd_cap:c_0805 | C30, C31 |
| 2 | 47k | w_smd_resistors:r_0805 | R1, R5 |
| 1 | 100u | w_smd_cap:c_elec_6.3x5.8 | C32 |
| 1 | 10n | w_smd_cap:c_0805 | C21 |
| 1 | 1u | w_smd_cap:c_0805 | C22 |
| 1 | 22k | w_smd_resistors:r_0805 | R3 |
| 1 | 30@100MHz | w_smd_cap:c_0603 | L1 |
| 1 | 4.7n | w_smd_cap:c_0805 | C3 |
| 1 | 4.7u | w_smd_cap:c_0805 | C20 |
| 1 | 50u | w_smd_cap:c_elec_6.3x5.8 | C33 |
| 1 | 510 | w_smd_resistors:r_0805 | R10 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P7 |
| 1 | CONN_02X04 | w_pin_strip:pin_socket_4x2 | P1 |
| 1 | CONN_02X09 | Pin_Headers:Pin_Header_Straight_2x09 | P6 |
| 1 | CONN_2 | w_pin_strip:pin_strip_2-90 | P4 |
| 1 | CONN_6 | w_pin_strip:pin_strip_6 | P2 |
| 1 | JUMPER3 | w_pin_strip:pin_strip_3 | JP1 |
| 1 | KNUSB | knielsenlib:10103594-0001LF | P5 |
| 1 | LP38691 | knielsenlib:TO-252-3 | U3 |
| 1 | MA-505 | knielsenlib:2-SOJ | X1 |
| 1 | MICRO-SD | knielsenlib:SD_502774 | P3 |
| 1 | SML-211UTT86 | LEDs:LED_0805 | D1 |
| 1 | SML-211YTT86 | LEDs:LED_0805 | D2 |
| 1 | STM32F46X_LQFP176 | w_smd_lqfp:LQFP-176 | U1 |
| 1 | SWITCH_4PIN | knielsenlib:SWITCH_FSMJSMA | B1 |
| 1 | US4881_HALL | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U2 |
The 276 most common of 280 parts.

knielsen/pcb_ledtorus_controller
Controller PCB for LED-torus - motor-controller, wireless communication, and PS2 controllers






Cryochasm/christmas-tree-disco-hw
KiCAD project for a Christmas Tree decoration.

JasonLiJT/HDR-backlight-PCB
The KiCad library and project of the PCB design for a 6-inch HDR LED backlight.
It measures 149 × 149 mm and has 4 copper layers, 0.8 mm thick.
280 parts, built around the TLC5955DCA, JUMPER3, SML-211UTT86 and SML-211YTT86. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the knielsen/pcb_ledtorus_2 repository on GitHub, at the commit this page was made from: the board is pcb_ledtorus_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask knielsen before reusing the design.