Skip to the content
2 layers80 × 100 mmSVx8Transistor, the printed circuit board in 3D

A PCB to drive Festo MH1 solenoid valves

Size
80 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
44
Pads
201
Tracks, vias
244, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Sep 2020
Updated
3 Feb 2025

Overview

SVx8Transistor is an open-source printed circuit board by knied, from the knied/SolenoidValveDriver repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 100 mm with 69 parts on 44 nets, routed with 244 tracks and 0 vias.

It is built around the IRFU024NPBF. Its parts include 25 resistors, 25 diodes, 8 transistors, 3 connectors and 1 capacitor.

Main components

1

README

README.md

SolenoidValveDriver

A PCB to drive Festo MH1 solenoid valves with a "USBIO24 R" (https://www.robotshop.com/de/en/elexol-usb-digital-interface-usbio24-r.html)

Complete Assembly

SymbolPartLink
Q1-Q8IRFU024Nhttps://www.infineon.com/cms/en/product/power/mosfet/12v-300v-n-channel-power-mosfet/irfu024n/
R1-R9220 Ohm
R10-R17100 Ohm
R18-R25100k Ohm
D1-D95mm Red LED
D10-D171N4937https://www.vishay.com/docs/88508/1n4933.pdf
D18-D251N4748https://www.futurlec.com/Diodes/1N4748.shtml
C1100uF
J116x TerminalBlock (5.08mm)
J22x TerminalBlock (5.08mm)
J32x5 Pin Header (2.54mm)

Parts

69
QtyValueFootprintReferences
9220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9
9LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9
8100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10, R11, R12, R13, R14, R15, R16, R17
8100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR18, R19, R20, R21, R22, R23, R24, R25
81N4748Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD18, D19, D20, D21, D22, D23, D24, D25
81N4937Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD10, D11, D12, D13, D14, D15, D16, D17
8IRFU024NPackage_TO_SOT_THT:TO-251-3-1EP_Horizontal_TabDownQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
1+24VTestPoint:TestPoint_Pad_D2.0mmTP2
1+5VTestPoint:TestPoint_Pad_D2.0mmTP3
1100uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1
1GNDTestPoint:TestPoint_Pad_D2.0mmTP1
1PowerTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2
1SignalsConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ3
1ValvesTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-16-5.08_1x16_P5.08mm_HorizontalJ1

More from knied/SolenoidValveDriver

1
  • 2 layers85 × 120 mmSVx8Controller, the printed circuit board in 3D

    SVx8Controller

    knied/SolenoidValveDriver

    A PCB to drive Festo MH1 solenoid valves

    61 partsMIT

Similar boards

  • 2 layers100 × 80 mmSstc v3, the printed circuit board in 3D

    Sstc v3

    hnaderi/sstc

    Musical solid state tesla coil circuit and part design

    108 parts3CC0-1.0
  • 2 layers100 × 87.5 mmDriver, the printed circuit board in 3D

    Driver

    hnaderi/drsstc

    Almost everything in my journey to build my own DRSSTCs

    127 partsCC0-1.0
  • 2 layers117.3 × 54.5 mmMegapad, the printed circuit board in 3D

    Megapad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    69 parts915
  • 2 layers100 × 96 mmBacklight, the printed circuit board in 3D

    Backlight

    jackw01/scanlight

    A better light source for scanning color negative film

    69 parts397CERN-OHL-W-2.0
  • 2 layers135.9 × 102.2 mmErgo42, the printed circuit board in 3D

    Ergo42

    Biacco42/Ergo42

    7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards

    69 parts218
  • 2 layers104.1 × 71.1 mmMinifp, the printed circuit board in 3D

    Minifp

    eigenco/frankenpi

    This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

    69 parts139
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    69 parts137
  • 2 layers120 × 60 mmOverglade Badges, the printed circuit board in 3D

    Overglade Badges

    KaiPereira/Overglade-Badges

    NFC hackathon badges for the Overglade game jam in Singapore!

    69 parts126

Questions

How big is the SVx8Transistor PCB?

It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SVx8Transistor use?

69 parts, built around the IRFU024NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SVx8Transistor KiCad files?

From the knied/SolenoidValveDriver repository on GitHub, at the commit this page was made from: the board is SVx8Transistor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SVx8Transistor design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).