Skip to the content
2 layers56 × 65 mmSmarterPi, the printed circuit board in 3D

Just a simple Hat for your Raspberry Pi (2,3,4) to provide an easier connection for peripherals

Size
56 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
38
Pads
95
Tracks, vias
71, 0
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Feb 2021
Updated
28 Jan 2026

Overview

SmarterPi is an open-source printed circuit board by klein0r, from the klein0r/pcb-smarter-pi repository on GitHub, published under the MIT licence. It is a 2-layer board of 56 × 65 mm with 27 parts on 38 nets, routed with 71 tracks and 0 vias.

It is built around the DS18B20. Its parts include 8 resistors, 5 connectors, 3 diodes, 3 switches and 1 IC. It belongs with the home automation and IoT boards of this library.

Main components

1

README

README.md

Smarter Pi PCB

Gerber-Files

Preview

PCB Preview

PCB Photo

Features

  • 1-Wire Interface (GPIO4)
  • Reed sensor Support (GPIO22)
  • RJ10 for serial interface (RX / TX)
  • 3x SMD LED
  • 3x Buttons (SMD or external terminal block)

Parts

  • J1: MPE 094-2-040 (20x2 connector)
  • J2: MEBP4-4
  • J3, J5: PHC 1725672 - MPT 0,5/ 4-2,54
  • J4: PHC 1725669 - MPT 0,5/ 3-2,54
  • R1: Resistor DIN0207 2.2k
  • R2: Resistor DIN0207 4.7k
  • R3, R4, R5: Resistor SMD 0805 330
  • R6, R7, R8: Resistor SMD 0805 10k
  • D1, D2, D3: LED SMD 0805
  • SW1, SW2, SW3: Push Button (3.81)
  • U1: DS18B20

License

The MIT License (MIT)

Copyright (c) 2026 Matthias Kleine info@haus-automatisierung.com

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Parts

27
QtyValueFootprintReferences
4MountingHolemyFP:MountingHole_2.75mm_NoPadH1, H2, H5, H6
310kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7, R8
3330ΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, R5
3LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3
3SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1, SW2, SW3
2Screw_Terminal_01x04TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_HorizontalJ3, J5
12,2kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
14,7kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1DS18B20Package_TO_SOT_THT:TO-92_InlineU1
1LOGOhaus-automatisierung:Logo2024G***
1RJ10haus-automatisierung:MEBP_44SJ2
1Raspberry_Pi_2_3Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1Screw_Terminal_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_HorizontalJ4

The 25 most common of 27 parts.

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers80 × 54.9 mmESP32WifiAisTempVolt2, the printed circuit board in 3D

    ESP32WifiAisTempVolt2

    AK-Homberger/NMEA2000WifiGateway-with-ESP32

    This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.

    18 parts94GPL-3.0
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 2 layers69 × 57 mmBuoy4, the printed circuit board in 3D

    Buoy4

    wjpavalko/Maker-Buoy

    Repository of Open Source Maker Buoy Files

    46 parts39
  • 2 layers26 × 34.8 mmWemosD1Mini, the printed circuit board in 3D

    WemosD1Mini

    RuiSantosdotme/ESP8266-Multisensor-Shield

    Complete step-by-step instructions »

    10 parts29
  • 2 layers162 × 60 mmEsp shield, the printed circuit board in 3D

    Esp shield

    felixwittwer/homeassistant_automaic_greenhouse

    A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

    20 parts27
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT

Questions

How big is the SmarterPi PCB?

It measures 56 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SmarterPi use?

27 parts, built around the DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SmarterPi KiCad files?

From the klein0r/pcb-smarter-pi repository on GitHub, at the commit this page was made from: the board is SmarterPi.kicad_pcb and its schematic SmarterPi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SmarterPi design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).