Skip to the content
2 layers35 × 50.9 mmIngestibleCapsule Board v2, the printed circuit board in 3D

IngestibleCapsule Board v2

kjpeng/ingestible-capsule
Size
35 × 50.9 mm
Copper layers
2
Thickness
0.82 mm
Parts
66
Nets
70
Pads
344
Tracks, vias
711, 67
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Mar 2025
Updated
24 Apr 2025

Overview

IngestibleCapsule Board v2 is an open-source printed circuit board by kjpeng, from the kjpeng/ingestible-capsule repository on GitHub. It is a 2-layer board of 35 × 50.9 mm with 66 parts on 70 nets, routed with 711 tracks and 67 vias.

It is built around the W25Q16JVSSIQ, ADXL343BCC and SR10100, with the ABS07, DF40C-10DP-0.4V(51) and DF40HB(2.5)-10DS-0.4V(51) among its other parts. Its parts include 24 capacitors, 12 resistors, 8 connectors, 5 ICs and 3 crystals. It belongs with the STM32 boards of this library.

Main components

7

Parts

66
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C13, C14, C15, C19, C20
610kResistor_SMD:R_0402_1005MetricR2, R5, R6, R7, R8, R9
6VAL**v2_mousebites:pwr_4_2pwr_4_2, pwr_4_2, pwr_4_2, pwr_4_2, pwr_4_2, pwr_4_2
41uCapacitor_SMD:C_0402_1005MetricC6, C16, C17, C18
210pCapacitor_SMD:C_0402_1005MetricC21, C22
210uCapacitor_SMD:C_0603_1608MetricC7, C8
216pCapacitor_SMD:C_0402_1005MetricC9, C10
22pCapacitor_SMD:C_0402_1005MetricC11, C12
2390RResistor_SMD:R_0402_1005MetricR3, R4
2390kResistor_SMD:R_0402_1005MetricR10, R12
2ABS07kjp_fplib:ABS07-120-32.768KHZ-TY2, Y3
2DF40C-10DP-0.4V(51)kjp_fplib:DF40C-10DP-0.4V(51)J1, J4
2DF40HB(2.5)-10DS-0.4V(51)kjp_fplib:DF40HB(2.5)-10DS-0.4V(51)J2, J3
2VAL**v2_mousebites:prog_3_2prog_3_2, prog_3_2
2VAL**v2_mousebites:i2c_2_2i2c_2_2, i2c_2_2
2VAL**v2_mousebites:spi_4_2spi_4_2, spi_4_2
10RResistor_SMD:R_0402_1005MetricR1
1180nInductor_SMD:L_0402_1005MetricL1
12M2Resistor_SMD:R_0603_1608MetricR11
1680pCapacitor_SMD:C_0402_1005MetricC23
168pCapacitor_SMD:C_0402_1005MetricC24
1ABM3kjp_fplib:ABM3-48.000MHZ-B2-TY1
1ADXL343Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6yU3
1Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ8
1Conn_01x02_Pinkjp_fplib:BM02BSRSSTBLFSNJ6
1HNC2-2.5P-3DS(02)kjp_fplib:HNC2-2.5P-3DS(02)J7
1LEDLED_SMD:LED_0402_1005MetricD1
1MLX90640kjp_fplib:MLX90640U2
1SR1010kjp_fplib:SR1010U5
1STM32G473CCUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU1
1TC2030-NLConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ5
1W25Q16JVSSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU4

More from kjpeng/ingestible-capsule

3

Similar boards

  • 4 layers47 × 39.5 mmStealthburner Toolhead PCB, the printed circuit board in 3D

    Stealthburner Toolhead PCB

    acha666/RP2040_ToolheadPCB_SB

    A Toolhead PCB for VORON StealthBurner based on RP2040

    145 parts43GPL-3.0
  • 2 layers75.9 × 50.1 mmSuspension telemetry, the printed circuit board in 3D

    Suspension telemetry

    porast1/suspension-telemetry

    Suspension telemetry system for mountain bike or dirt bike

    77 parts14MIT
  • 2 layers63 × 89.5 mmRobot, the printed circuit board in 3D

    Robot

    sidstuff/robot

    A KiCad PCB for an obstacle avoiding robot.

    71 parts5MIT
  • 4 layers54 × 57 mmTagBot, the printed circuit board in 3D

    TagBot

    exysta/2425_ESE_Projet_TagBot

    Vous vous trouvez actuellement dans le projet TagBot (ou robot chat), qui s'intègre à un projet de classe où chaque équipe doit concevoir un robot.

    87 parts3MIT
  • 4 layers116.5 × 98 mmHw v1, the printed circuit board in 3D

    Hw v1

    Churrosoft/uEFI-v6.x

    Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC

    248 parts2
  • 2 layers10.5 × 15.5 mmADXL343 Accelerometer Sensor Board, the printed circuit board in 3D

    ADXL343 Accelerometer Sensor Board

    fatihdedeic/ADXL343-Eval-Board

    Small footprint I2C protocol evaluation board designed for ADXL343 series accelerometers.

    5 parts2
  • 4 layers57 × 54 mmPojet V NOM KiCAD, the printed circuit board in 3D

    Pojet V NOM KiCAD

    MohamedBenabdelhadi/2425_ESE_Projet_V-NOM

    Mohamed Benabdelhadi_Nouhaila Faris_Oliver Belliard_Valerian Priou

    78 parts2
  • 6 layers49.3 × 39.3 mmVoronToolheadPCB, the printed circuit board in 3D

    VoronToolheadPCB

    shxshxshxshx/VoronToolheadPCB

    USB Toolhead Board for Voron Stealthburner

    99 parts2GPL-3.0

Questions

How big is the IngestibleCapsule Board v2 PCB?

It measures 35 × 50.9 mm and has 2 copper layers, 0.82 mm thick.

What parts does the IngestibleCapsule Board v2 use?

66 parts, built around the W25Q16JVSSIQ, ADXL343BCC, SR10100 and ABS07. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IngestibleCapsule Board v2 KiCad files?

From the kjpeng/ingestible-capsule repository on GitHub, at the commit this page was made from: the board is IngestibleCapsule-Board_v2/IngestibleCapsule-Board_v2.kicad_pcb and its schematic IngestibleCapsule-Antennae/IngestibleCapsule-Antennae.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IngestibleCapsule Board v2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask kjpeng before reusing the design.