

Shapeshifter 4060 v2 3
Home of the Shapeshifter 4060 keyboard
- Size
- 285 × 94.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 156
- Nets
- 132
- Pads
- 1,290
- Tracks, vias
- 1,357, 139
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Feb 2020
- Updated
- 10 Sep 2021
Overview
Shapeshifter 4060 v2 3 is an open-source printed circuit board by kitsunekeyboards, from the kitsunekeyboards/shapeshifter4060 repository on GitHub, published under the MIT licence. It is a 2-layer board of 285 × 94.6 mm with 156 parts on 132 nets, routed with 1,357 tracks and 139 vias.
It is built around the ATMEGA32U4, MCP73831T-2ATI/OT-HXY and USBLC6-2SC6, with the MBR120 among its other parts. Its parts include 55 switches, 49 diodes, 13 resistors, 8 capacitors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4README
pcb/Shapeshifter_4060_v3/kicad/README.mdKitsune Keyboards Shapeshifter 4060 v3.0
PCB details
Process reminders
Prepping for ordering from JLCPCB
- File > Plot
- Format = Gerber
- Output directory = ../gerber/
- Included layers = Cu,Paste,SilkS,Mask,Edge.Cuts
- Generate Drill Files
- Excellon
- Postscript
- Absolute origin
- Open up GerbView from kicad
- File > Open Excellon Drill Files, select the two drl files (if you open these in the wrong order, the drill holes won't sit on top of the copper so it's hard to tell if there are any pads that aren't getting drilled)
- File > Open Gerber Files, select all the gbr files
- Hide all but the drill layers and F_Cu and B_Cu
- Stare and pretend that this means something to you
- Stare particularly hard at F_Cu and B_Cu
- Perhaps check to see if there are any lines that look like they're intersecting or something
Rotating the board so you can do wiring nicely
- Show all layers
- Select all with the mouse and rotate 10 degrees. To get the thumbs, rotate 40.
- Hide Dwgs.User, set grid to 0.01mm, and "Set the origin point for the grid" to the center of the yellow cross on Eco2.User (center of the board about 10mm below the nice!nano)
- Set the grid back to 0.1mm
- Do some work
Setting up zones
- Use the zone tool to draw a box around the area
- Right click the zone (may have to select the board as well, then shift click it to deselect it) and Zones > Duplicate Zone to Layer
- Press B to fill zones
Generating the BOM
- Go into the schema editor
- Tools > Edit Symbol Fields
- Add the fields "Designation" and "Supplier Number"
- Find your parts from the Elecrow parts library: https://www.elecrow.com/component-library.html?page=1&cate=Switch
- Add the part number (like B3U-1000p) to the Supplier Number, and if there is one, add the pad shape (like SOD-123) to the Designation. Also add the Datasheet link.
- Group by Supplier Number
- Apply and then hit OK
- Tools > Generate BOM
- Choose
bom2grouped_csvand Generate mv Laptreus-v3 ../bom/Laptreus-v3.csvrm Laptreus-v3.xml- Import
bom/Laptreus-v3.csvto google drive (not sure why it doesn't have .csv on the end) - Copy all the switch References into VSCode and smash them onto one line, then replace the Reference on the first switch. Do the same for Values.
- Now delete all the extra switches and clean up the rows
- Now delete all the rows that represent things we don't want them assembling (nice nano for instance)
- Copy all the values and past to VSCode, this should make a tsv. Save the file to
bom/Laptreus-v3.tsv
Generate the position file
- In PCBNew, File > Fabrication Outputs > Generate footprint position files
- Set output path to
../pcba/, ASCII, millimeters, Separate files for front and back
Parts
156| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | DIODE | Laptreus v2 Footprints:Diode-dual | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 4 | 1µF | Laptreus v2 Footprints:Capacitor-0805MP | C2, C4, C6, C7 |
| 4 | FIDUCIAL | hole:FIDUCIAL | FID, FID, FID, FID |
| 3 | 100K | Laptreus v2 Footprints:0805-NO | R2, R4, R5 |
| 3 | 10µF | Laptreus v2 Footprints:Capacitor-0805MP | C1, C3, C5 |
| 3 | 2.2K | Laptreus v2 Footprints:0805-NO | R6, R7, R13 |
| 3 | PINHD-1X1CB | Adafruit NeoPixel Ring 12:1X01-CLEANBIG | JP1, JP2, JP3 |
| 3 | Screw | Laptreus v2 Footprints:PKRH | S2, S3, S6 |
| 3 | Tofu screw | Laptreus v2 Footprints:PKRH | S7, S8, S9 |
| 2 | 1K | Laptreus v2 Footprints:0805-NO | R1, R10 |
| 2 | 22 | Laptreus v2 Footprints:0805-NO | R8, R9 |
| 2 | 5.1K | Laptreus v2 Footprints:0805-NO | R11, R12 |
| 2 | JSTPH | Laptreus v2 Footprints:JSTPH2-with-THT | X1, X2 |
| 2 | SHIFT | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW25, SW41 |
| 2 | SWDIO | Adafruit Feather 32u4 Bluefruit LE:PAD-1.5X2.0 | TP2, TP3 |
| 2 | SW_SPDT | Laptreus v2 Footprints:EG1218 | SW_POW_EN1, SW_POW_EN2 |
| 2 | Screw | Laptreus v2 Footprints:PKRHSL-NPTH | S4, S5 |
| 1 | " | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW24 |
| 1 | , | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW33 |
| 1 | . | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW34 |
| 1 | / | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW35 |
| 1 | 100nF | Laptreus v2 Footprints:Capacitor-0805MP | C20 |
| 1 | 10K | Laptreus v2 Footprints:0805-NO | R3 |
| 1 | 8MHz | Adafruit Feather 32u4 Bluefruit LE:RESONATOR-SMD | Y1 |
| 1 | ; | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW23 |
| 1 | A | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW14 |
| 1 | ALT/TAB | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW39 |
| 1 | ATMEGA32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | IC1 |
| 1 | B | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW30 |
| 1 | BKSP | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW12 |
| 1 | BKSP/LIFT | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW42 |
| 1 | BLUE | Adafruit Feather 32u4 Bluefruit LE:CHIPLED_0805_NOOUTLINE | L3 |
| 1 | C | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW28 |
| 1 | CMD | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW40 |
| 1 | CTRL/GRV | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW38 |
| 1 | D | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW16 |
| 1 | DOWN | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW46 |
| 1 | E | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW4 |
| 1 | ENTER | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW36 |
| 1 | ENTER/LIFT | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW43 |
| 1 | ESC | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW13 |
| 1 | F/LOWER | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW17 |
| 1 | G | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW18 |
| 1 | H | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW19 |
| 1 | HRO-TYPE-C-31-M-12 | Laptreus v2 Footprints:HRO-TYPE-C-31-M-12 | J1 |
| 1 | HYPER | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW37 |
| 1 | I | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW9 |
| 1 | ISP | Laptreus v2 Footprints:isp_standard | J2 |
| 1 | J/RAISE | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW20 |
| 1 | K | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW21 |
| 1 | L | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW22 |
| 1 | LEFT | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW45 |
| 1 | M | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW32 |
| 1 | MBR120 | Adafruit Feather 32u4 Bluefruit LE:SOD-123 | D49 |
| 1 | MCP73831T-2ATI/OT | Adafruit Feather 32u4 Bluefruit LE:SOT23-5 | U1 |
| 1 | MDBT40 | Adafruit Feather 32u4 Bluefruit LE:BLE_MODULE_RAYTAC_MDBT40 | U3 |
| 1 | N | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW31 |
| 1 | O | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW10 |
| 1 | ORANGE | Adafruit Feather 32u4 Bluefruit LE:CHIPLED_0805_NOOUTLINE | L4 |
| 1 | P | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW11 |
| 1 | Polyfuse | Fuse_Holders_and_Fuses:Fuse_SMD1206_Reflow | F1 |
| 1 | Q | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW2 |
| 1 | R | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW5 |
| 1 | RED | Adafruit Feather 32u4 Bluefruit LE:CHIPLED_0805_NOOUTLINE | L2 |
| 1 | RIGHT | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW48 |
| 1 | S | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW15 |
| 1 | SPACE | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW44 |
| 1 | SPX3819-3.3 | Adafruit Feather 32u4 Bluefruit LE:SOT23-5 | U2 |
| 1 | SWCLK | Adafruit Feather 32u4 Bluefruit LE:PAD-1.5X2.0 | TP1 |
| 1 | SWITCH_PUSH | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW_RESET2 |
| 1 | SWITCH_PUSH | Laptreus v2 Footprints:SW_SPST_B3U-1000P | SW_RESET1 |
| 1 | Screw | Laptreus v2 Footprints:PKRH-Round | S1 |
| 1 | T | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW6 |
| 1 | TAB | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_No_Alignment_Pad | SW1 |
| 1 | U | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW8 |
| 1 | UP | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW47 |
| 1 | USBLC6-2SC6 | Laptreus v2 Footprints:USBLC6-2SC6 | U6 |
| 1 | V | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW29 |
| 1 | W | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW3 |
| 1 | X | Laptreus v2 Footprints:Hybrid_Kailh_MX_Socket_Through_Hole_No_Alignment_Pad | SW27 |
The 153 most common of 156 parts.
More from kitsunekeyboards/shapeshifter4060
6- 4 layers285 × 95.1 mm

- 2 layers285 × 95.1 mm

Laptreus v2.2-backup
kitsunekeyboards/shapeshifter4060
Home of the Shapeshifter 4060 keyboard
127 parts1MIT - 2 layers285 × 94.6 mm

- 2 layers285 × 100 mm

- 2 layers285 × 94.6 mm

- 2 layers284 × 100 mm

Similar boards
- 2 layers40 × 50 mm

- 4 layers61.8 × 27.5 mm

Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 4 layers

- 2 layers50.8 × 29.2 mm

- 4 layers32 × 63.8 mm

- 2 layers120 × 100 mm

- 2 layers50 × 60 mm

Curl tracker
terryzhw/curl-tracker
Curl Tracker is a wearable bicep curl tracker that uses an ESP32-C3 Super Mini alongside a MPU-6500 IMU to count reps, measure curl speed, and evaluate form in real-time.
55 partsMIT - 4 layers33.8 × 38 mm

Questions
How big is the Shapeshifter 4060 v2 3 PCB?
It measures 285 × 94.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shapeshifter 4060 v2 3 use?
156 parts, built around the ATMEGA32U4, MCP73831T-2ATI/OT-HXY, USBLC6-2SC6 and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shapeshifter 4060 v2 3 KiCad files?
From the kitsunekeyboards/shapeshifter4060 repository on GitHub, at the commit this page was made from: the board is pcb/Shapeshifter_4060_v2_3/kicad/Backup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shapeshifter 4060 v2 3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).