

- Size
- 33.5 × 22.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 18
- Pads
- 55
- Tracks, vias
- 95, 17
- Pours
- 63
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Sep 2025
- Updated
- 3 Oct 2025
Overview
BB Amp is an open-source printed circuit board by kinoshita-lab, from the kinoshita-lab/Breadboard-Amplifier repository on GitHub, published under the MIT licence. It is a 2-layer board of 33.5 × 22.7 mm with 21 parts on 18 nets, routed with 95 tracks and 17 vias.
It is built around the LMV358 and PAM8302AASCR. Its parts include 7 capacitors, 5 connectors, 4 resistors, 2 ICs and 1 diode. It belongs with the audio and music boards of this library.
Main components
2LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational AmplifierPAM8302AASCR
MSOP-8-40℃~+85℃ 0.3% 1-Channel 2.5Wx1@4Ω 2V~5.5V 4mA 50dB 80dB 85% Class D Filterless architecture MSOP-8 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
README
README.mdParts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4, J5 |
| 3 | 100n | OPL_Capacitor:C0402 | C1, C3, C7 |
| 2 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C2, C4 |
| 2 | 1u | OPL_Capacitor:C0402 | C5, C6 |
| 1 | 10k | my_footprint:POT_3386K | RV1 |
| 1 | Conn_01x02 | my_footprint:Conn_TerminalBlock_DORABO DB260-5.0-2P-GY_C5180321 | J2 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | my_footprint:kinoshita-logo_simplified_600dpi | G*** |
| 1 | PAM8302AAS | Package_SO:MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | RED | my_footprint:LED_0603_0402_HandSoldering_easier | D1 |
Similar boards
- 4 layers121.9 × 44.4 mm

- 4 layers25.3 × 35.1 mm

Agb hifi audio pcb
cajunpanda/gameboy-hifi-audio
A HiFi audio mod for various Game Boy models
66 parts25MIT - 2 layers81 × 55 mm

- 4 layers54.7 × 78.5 mm

DisplayModule PONSv71
MasaoC/GPS-TFT-Map_PONS
鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。
151 parts14MIT - 2 layers82.5 × 136.7 mm

Gameboy dmg
alxhoff/gameboy-dmg-pcb
PCB for Gameboy DMG with audio and GPIO expander to provide I2C interface to push buttons
95 parts4GPL-3.0 - 4 layers182 × 150 mm

- 2 layers58 × 44 mm

Button
birkenfeld/stm_button_rust
Using nightly Rust and cargo, just do a cargo build --release.
40 parts3 - 4 layers70 × 90 mm

Questions
How big is the BB Amp PCB?
It measures 33.5 × 22.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BB Amp use?
21 parts, built around the LMV358 and PAM8302AASCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BB Amp KiCad files?
From the kinoshita-lab/Breadboard-Amplifier repository on GitHub, at the commit this page was made from: the board is BB-Amp.kicad_pcb and its schematic BB-Amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BB Amp design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
