2 layers390 × 78.2 mm
MBO
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
61 parts960Apache-2.0
2 layers76.2 × 114.3 mm
Numpad1
KingJacker/numpad01- Size
- 76.2 × 114.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 40
- Pads
- 222
- Tracks, vias
- 288, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Feb 2025
- Updated
- 6 Feb 2025
Overview
Numpad1 is an open-source printed circuit board by KingJacker, from the KingJacker/numpad01 repository on GitHub. It is a 2-layer board of 76.2 × 114.3 mm with 61 parts on 40 nets, routed with 288 tracks and 53 vias.
Its parts include 23 diodes, 22 switches, 2 resistors and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5 |
| 18 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW20 +2 |
| 6 | Graphics | , , , , , | |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.00u_90deg | SW15, SW21 |
| 1 | Battery+ | TestPoint:TestPoint_Pad_D4.0mm | B+ |
| 1 | Battery- | TestPoint:TestPoint_Pad_D4.0mm | B- |
| 1 | LOGO | Logos:PixelCat | G*** |
| 1 | NiceNanoPads | NiceNanoPad:NiceNanoPads | U1 |
| 1 | PHAP3344BR | Reset:PTS526SM15SMTR2LFS | S1 |
| 1 | PWR_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D23 |
| 1 | STATUS_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D22 |
| 1 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.00u | SW19 |
Questions
How big is the Numpad1 PCB?
It measures 76.2 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Numpad1 use?
61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Numpad1 KiCad files?
From the KingJacker/numpad01 repository on GitHub, at the commit this page was made from: the board is Numpad1/Numpad1.kicad_pcb and its schematic Numpad1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Numpad1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask KingJacker before reusing the design.
Similar boards
- 2 layers
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
61 parts530 - 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0 - 2 layers135.9 × 89.5 mm
Left
TeXitoi/keyseebee
KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.
61 parts348MIT - 2 layers59.7 × 57.5 mm
- 2 layers35 × 38.4 mm
Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233 - 2 layers99.9 × 99.9 mm
- 2 layers135.3 × 106.7 mm
