2 layers64 × 39 mm
2 layers62 × 83.6 mm
C64 Pi Interface
KimJorgensen/C64_Pi_Interface16C64 Pi Interface
- Size
- 62 × 83.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 107
- Pads
- 284
- Tracks, vias
- 1,274, 149
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jul 2019
- Updated
- 18 Dec 2025
Overview
C64 Pi Interface is an open-source printed circuit board by KimJorgensen, from the KimJorgensen/C64_Pi_Interface repository on GitHub, published under the MIT licence. It is a 2-layer board of 62 × 83.6 mm with 35 parts on 107 nets, routed with 1,274 tracks and 149 vias.
It is built around the 23LC1024-E/P, AMS1117-3.3 and W25Q128FVSQ. Its parts include 10 capacitors, 6 connectors, 4 ICs, 3 resistors and 2 switches. It belongs with the interfaces and adapters and retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
3
23LC1024-E/P
PDIP-8-40℃~+125℃ 10mA 1Mbit 2.5V~5.5V 4uA SPI PDIP-8 SRAM ROHSMicrochip TechnologySRAM
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsW25Q128FVSQ
SOIC-8_208MILSOIC-8_208mil New Arrivals ROHSWinbond ElecUncategorised
README
README.mdC64 - Pi Interface
Project is moved to https://codeberg.org/KimJorgensen/C64_Pi_Interface
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C6, C7, C8, C9, C10 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 2 | 100R | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 1 | 23LC1024 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 25MHz | Oscillator:Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm | X1 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | C64-Exp-Port | C64:C64-Cart | J1 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | JTAG-PLD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | PLD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Power Source | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1 |
| 1 | Switch | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW2 |
| 1 | W25Q128FV | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | XC95144XL-TQ100 | Package_QFP:TQFP-100_14x14mm_P0.5mm | U2 |
The 34 most common of 35 parts.
Questions
How big is the C64 Pi Interface PCB?
It measures 62 × 83.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C64 Pi Interface use?
35 parts, built around the 23LC1024-E/P, AMS1117-3.3 and W25Q128FVSQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C64 Pi Interface KiCad files?
From the KimJorgensen/C64_Pi_Interface repository on GitHub, at the commit this page was made from: the board is kicad/C64_Pi_Interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C64 Pi Interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers110 × 57 mm
- 4 layers100 × 81 mm
- 2 layers100 × 80 mm
Gridnet
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
46 parts5CERN-OHL-W-2.0 - 2 layers138.4 × 91.4 mm
STM32 MegaBlaster
AidanHockey5/STM32_VGM_Player_YM2612_SN76489
A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.
96 parts117AGPL-3.0 - 2 layers
Panel old
dankar/altair8800
What started as a Intel 8080 emulator turned into a Altair 8800 emulator with associated hardware for a front panel.
103 parts31MIT - 2 layers67 × 100 mm
Npr revB
slintak/NPR70
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.
136 parts23GPL-3.0 - 4 layers99.1 × 99.1 mm
TACNPR
partio-scout/scoms-tacnpr
TACNPR by Scoms -- Open hardware high-speed Ethernet/IP data radio for the 433 MHz HAM band, binary-compatible with the original NPR by F4HDK.
310 parts9