Skip to the content
2 layers78 × 48 mmSentinel Passive Carrier, the printed circuit board in 3D

Sentinel Passive Carrier

Kilmanagh/Sentinel_ESP32

ESP Sentinel Project

Size
78 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
12
Pads
30
Tracks, vias
51, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
22 May 2026

Overview

Sentinel Passive Carrier is an open-source printed circuit board by Kilmanagh, from the Kilmanagh/Sentinel_ESP32 repository on GitHub. It is a 2-layer board of 78 × 48 mm with 8 parts on 12 nets, routed with 51 tracks and 0 vias.

It is built around the BME280. Its parts include 6 connectors, 1 capacitor and 1 resistor. It belongs with the ESP32 boards of this library.

Main components

1

README

hardware/pcb/README.md

PCB Package

This directory holds PCB fabrication package assets.

Current recommendation

For the current Sentinel hardware build, do not treat this folder as the primary assembly path.

The recommended real-world build is:

  • the existing AITRIP ESP32 baseplate / expansion kit
  • Dupont wiring
  • the practical wiring guide in hardware/Sentinel_Baseplate_Kit_Wiring.md

This hardware/pcb/ folder should currently be treated as an experimental custom-board branch and documentation artifact, not the default build path.

Current source

  • Sentinel_Passive_Carrier.kicad_pcb: generated KiCad board source for a passive carrier board
  • generate_passive_carrier.py: reproducible pcbnew generator for the current board source
  • Sentinel_Passive_Carrier_drc.rpt: latest KiCad DRC report

Current design scope

This is a passive carrier board derived from the current wiring, schematic, and enclosure documentation.

It assumes:

  • ESP32 DevKit remains off-board and connects through a wire harness header rather than a direct socket footprint
  • BME280, AM312, MAX9814, reed switch, and LED strip land on generic header / terminal positions
  • board outline is sized conservatively to fit within the current 95 mm x 65 mm enclosure envelope

It is useful for:

  • preserving the custom PCB experiment
  • future routing / layout work
  • exporting fabrication files for review while the design is still being corrected

It is not yet the recommended path for:

  • immediate hardware assembly
  • ordering production boards
  • using as the single source of truth for the active build

Fabrication package

The gerbers/ folder now contains real KiCad exports for the passive carrier board, including:

  • copper layers
  • solder mask layers
  • silkscreen layers
  • edge cuts
  • Excellon drill file
  • drill map and drill report
  • KiCad gerber job file

Validation status

The fabrication package is generated from a real board source, but the current carrier layout is not yet fully DRC-clean.

Practical meaning:

  • the files are real KiCad exports
  • the board is still not ready to be treated as fabrication-safe
  • the DRC report must be resolved before any board order is placed

Until that happens, the active hardware reference remains the baseplate / Dupont path documented in hardware/Sentinel_Baseplate_Kit_Wiring.md.

Parts

8
QtyValueFootprintReferences
1330RR1
1470uFC1
1AM312_PIRJ3
1BME280J2
1ESP32_WIRE_HARNESSJ1
1LED_STRIPJ6
1MAX9814J4
1REED_SWITCHJ5

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 2 layers29.8 × 33.7 mmPecanpico9, the printed circuit board in 3D

    Pecanpico9

    DL7AD/pecanpico9

    A lightweight APRS tracker for balloons

    116 parts68GPL-3.0
  • 2 layers136 × 100 mmClimateSprinklerController, the printed circuit board in 3D

    ClimateSprinklerController

    kbx81/ClimateSprinklerController

    ESP32-based climate and sprinkler controller for use with ESPHome

    194 parts56
  • 4 layers36.6 × 60.3 mmStratoSoar MK3.0, the printed circuit board in 3D

    StratoSoar MK3.0

    crnicholson/StratoSoar-MK3

    StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

    85 parts43
  • 2 layers23 × 50 mmPecanpico10, the printed circuit board in 3D

    Pecanpico10

    DL7AD/pecanpico10

    A lightweight APRS tracker and digipeater

    123 parts43
  • 2 layers97 × 77.5 mmESPlant, the printed circuit board in 3D

    ESPlant

    CCHS-Melbourne/ESPlant

    Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266

    77 parts37

Questions

How big is the Sentinel Passive Carrier PCB?

It measures 78 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sentinel Passive Carrier use?

8 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sentinel Passive Carrier KiCad files?

From the Kilmanagh/Sentinel_ESP32 repository on GitHub, at the commit this page was made from: the board is hardware/pcb/Sentinel_Passive_Carrier.kicad_pcb and its schematic hardware/schematics/Sentinel_ESP32_Node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sentinel Passive Carrier design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kilmanagh before reusing the design.