2 layers138.1 × 114.3 mm
2 layers49.8 × 99.8 mm
GreenScreamer
kidwidget/GreenScreamer1Guitar Effects Pedal
- Size
- 49.8 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 24
- Pads
- 118
- Tracks, vias
- 225, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Jan 2017
- Updated
- 23 Jan 2017
Overview
GreenScreamer is an open-source printed circuit board by kidwidget, from the kidwidget/GreenScreamer repository on GitHub. It is a 2-layer board of 49.8 × 99.8 mm with 67 parts on 24 nets, routed with 225 tracks and 0 vias.
Its parts include 17 resistors, 11 capacitors, 3 diodes, 3 connectors and 2 transistors. It belongs with the audio and music boards of this library.
README
README.mdGreenScreamer
Guitar Effects Pedal Uses Kicad Has extra mounting holes for all capacitors, resistors, and diodes that effect tone. This is so you can solder in female pin headers to test various combinations before commiting. Bottom layer is only for ground plane. It can be omitted if you are making a single sided PCB. This will need jumper wires, refer to picture of finished product.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | CustomFootprints:Resistor2 | R3, R4, R5, R6, R10, R15, R17 |
| 4 | 1k | CustomFootprints:Resistor2 | R1, R9, R12, R13 |
| 3 | JackMono | CustomFootprints:MonoJackRemote | J1, J2, J3 |
| 2 | .22uf Tant | CustomFootprints:Capacitor1 | C7, C8 |
| 2 | 1N914 | CustomFootprints:diode3 | D2, D3 |
| 2 | 1uF | CustomFootprints:Capacitor1 | C3, C9 |
| 2 | 510k | CustomFootprints:Resistor2 | R2, R14 |
| 2 | KSC1518 | CustomFootprints:TO-92_Inline_Wide_Oval | Q1, Q2 |
| 1 | .027uF | CustomFootprints:Capacitor1 | C1 |
| 1 | .047uF | CustomFootprints:Capacitor1 | C5 |
| 1 | .1uF | CustomFootprints:Capacitor1 | C10 |
| 1 | 100 | CustomFootprints:Resistor2 | R16 |
| 1 | 100k | CustomFootprints:Potentiometer_WirePads_Small_Oval | RV3 |
| 1 | 100uF | CustomFootprints:C_Radial_D5_L6_P2.5 | C2 |
| 1 | 10uF | CustomFootprints:Capacitor1 | C11 |
| 1 | 1N4003 | CustomFootprints:diode3 | D1 |
| 1 | 20k | CustomFootprints:Potentiometer_WirePads_Small_Oval | RV2 |
| 1 | 220 | CustomFootprints:Resistor2 | R11 |
| 1 | 4.7k | CustomFootprints:Resistor2 | R7 |
| 1 | 47uF | CustomFootprints:C_Radial_D5_L6_P2.5 | C4 |
| 1 | 500k | CustomFootprints:Potentiometer_WirePads_Small_Oval | RV1 |
| 1 | 51k | CustomFootprints:Resistor2 | R8 |
| 1 | 51pF | CustomFootprints:Capacitor1 | C6 |
| 1 | JNR4558 | Housings_DIP:DIP-8_W7.62mm_LongPads | U1 |
The 40 most common of 67 parts.
Questions
How big is the GreenScreamer PCB?
It measures 49.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GreenScreamer use?
67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GreenScreamer KiCad files?
From the kidwidget/GreenScreamer repository on GitHub, at the commit this page was made from: the board is GreenScreamer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GreenScreamer design in my own project?
Its repository states no licence, so its author keeps all rights: ask kidwidget before reusing the design.
Similar boards
- 2 layers133.1 × 53.8 mm
- 2 layers160 × 100.1 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers65 × 56 mm
Zpui shld wg12864b
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
67 parts253GPL-3.0 - 2 layers138.1 × 89.7 mm
- 2 layers51 × 30 mm
- 2 layers93.5 × 55 mm
- 2 layers58.4 × 101.6 mm
