4 layers101.1 × 50.3 mm
Modballoon
ODZ-UJF-AV-CR/balon
Semicoductor Cosmic ray detector High-altitude balloon experiment.
153 parts4
4 layers92.5 × 92.5 mm
Upsat comms hardware
Ki365/upsat-comms-hardwareCOMMS Hardware for UPSat
- Size
- 92.5 × 92.5 mm
- Copper layers
- 4
- Thickness
- 1.55 mm
- Parts
- 314
- Nets
- 188
- Pads
- 776
- Tracks, vias
- 1,623, 315
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Aug 2024
- Updated
- 8 Aug 2024
Overview
Upsat comms hardware is an open-source printed circuit board by Ki365, from the Ki365/upsat-comms-hardware repository on GitHub. It is a 4-layer board of 92.5 × 92.5 mm with 314 parts on 188 nets, routed with 1,623 tracks and 315 vias.
It is built around the STM32F407VGT6, RF5110GTR7 and ADT7420UCP, with the CC1120 and TPS79930DDC among its other parts. Its parts include 108 capacitors, 44 resistors, 20 inductors, 12 ICs and 2 crystals. It belongs with the STM32 boards of this library.
Main components
5
STM32F407VGT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
RF5110GTR7
QFN-16-EP(3x3)-40℃~+85℃ 2.7V~4.8V 2A 33dB 34.5dBm Low-power mode、Variable gain control QFN-16-EP(3x3) RF Amplifiers ROHSQorvoRF AmplifiersADT7420UCP
QFN16-20° to +105°C ±0.25°C Accurate, 16-Bit Digital I2C Temperature SensorAnalog DevicesUncategorisedCC1120
UncategorisedTexas Instruments
TPS79930DDC
TSOT-23-5-40℃~+125℃@(Tj) 1 175mV@(200mA) 200mA 31.5uVrms 3V 40uA 6.5V 66dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdUPSat communications hardware
Hardware for UPSat communications subsystem and for the antenna deployment mechanism. This repository includes all needed.
Documentation
Repository policy
UPSat hardware repositories only track source design files. All needed derivative files (e.g. stl, grb etc) for production are created per release, packaged in an archive and uploaded linked to a [release](link needed).
Each major release (x.0.0) is branched out of master. Subsequent fixes (minor or not) are commited on those branches and tagged accordingly.
Master branch is most times under active development, so expect things to break. For production ready and previous releases source files check tags and branches.
License
© 2016 Manos Theodoridis - APEL - University of Patras
© 2016 Libre Space Foundation & commiters
Licensed under the CERN OHLv1.2.
Parts
314| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 47nF | libs:0402_cc | C5, C6, C12, C13, C15, C16, C18, C19, C21, C22, C23, C26, C57, C58, C71, C73 +8 |
| 22 | 0 | libs:0402_cc | R10, R24, R26, R27, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68, R69 +6 |
| 11 | 100nF | libs:0603murata2 | C24, C25, C38, C41, C42, C43, C45, C46, C48, C49, C137 |
| 8 | 470 | libs:0603murata2 | R30, R31, R34, R35, R36, R37, R38, R41 |
| 6 | 10nF | libs:0402_cc | C8, C27, C30, C62, C96, C99 |
| 4 | 10000pF | libs:0603murata2 | C123, C125, C141, C147 |
| 4 | 100nF | libs:0402_cc | C3, C4, C53, C55 |
| 4 | 15 pF | libs:0402_cc | C34, C35, C37, C39 |
| 4 | 15pF | libs:0402_cc | C10, C11, C67, C69 |
| 4 | 1nF | libs:0603murata2 | C127, C129, C143, C152 |
| 3 | 10K | libs:0603murata2 | R3, R43, R45 |
| 3 | 1uF | libs:0603murata2 | C28, C29, C50 |
| 3 | 5.1pF | libs:0402_cc | C109, C111, C113 |
| 2 | 0 | libs:0603murata2 | R20, R47 |
| 2 | 1.8nF | libs:0402_cc | C20, C87 |
| 2 | 100pF | libs:0402_cc | C33, C105 |
| 2 | 15nH | libs:0402_cc | L17, L25 |
| 2 | 18pF | libs:0603murata2 | C139, C145 |
| 2 | 2.2uF | libs:0603murata2 | C36, C40 |
| 2 | 2.2uF | libs:CC1120DecCAP | C17, C81 |
| 2 | 20pF | libs:0603murata2 | C1, C2 |
| 2 | 220nF | libs:0402_cc | C7, C61 |
| 2 | 22pF | libs:0402_cc | C9, C65 |
| 2 | 27nH | libs:0402_cc | L19, L21 |
| 2 | 3.3uF | libs:0603murata2 | C121, C153 |
| 2 | 330pF | libs:0603murata2 | C131, C132 |
| 2 | 47pF | libs:0603murata2 | C149, C151 |
| 2 | 56K | libs:0402_cc | R17, R32 |
| 2 | 56nH | libs:0402_cc | L13, L15 |
| 2 | 56pF | libs:0603murata2 | C135, C169 |
| 2 | 6.8pF | libs:0603murata2 | C51, C52 |
| 2 | 91 nH | libs:0402_cc | L6, L7 |
| 2 | BLM15HG102SN1D | libs:0402_cc | L1, L11 |
| 2 | CC1120 | cc1120:cc1120 | U4, U10 |
| 2 | FA_128_ | libs:crystal_fa128 | U3, U18 |
| 2 | SMA | comms_upsat:mmcx_conn | UHF, VHF |
| 2 | TBD | libs:0402_cc | C14, C75 |
| 2 | TPS79930 | w_smd_trans:sot23-5 | U2, U8 |
| 2 | TXCO_TG_5021CG | libs:TXCOTG5021CG | U1, U6 |
| 1 | 0.1uF | libs:0603murata2 | C117 |
| 1 | 1.8 pF | libs:0402_cc | C47 |
| 1 | 100 pF | libs:0402_cc | C32 |
| 1 | 120 nH | libs:0402_cc | L8 |
| 1 | 150 nH | libs:0402_cc | L2 |
| 1 | 150 pF | libs:0402_cc | C31 |
| 1 | 18 | libs:0603murata2 | R51 |
| 1 | 18 | libs:0402_cc | R39 |
| 1 | 18 pF | libs:0402_cc | C44 |
| 1 | 180 | libs:0603murata2 | R49 |
| 1 | 180 Ohm | libs:0603murata2 | R53 |
| 1 | 180 nH | libs:0402_cc | L3 |
| 1 | 19 nH | libs:0402_cc | L5 |
| 1 | 2.2pF | libs:0402_cc | C107 |
| 1 | 22 Ohm | libs:0402_cc | R19 |
| 1 | 22 pF | libs:0603murata2 | C160 |
| 1 | 220 | libs:0603murata2 | R5 |
| 1 | 22nH | libs:0402_cc | L27 |
| 1 | 39pF | libs:0402_cc | C101 |
| 1 | 4 pF | libs:0603murata2 | C164 |
| 1 | 4.3 nH | libs:0603murata2 | L33 |
| 1 | 43 nH | libs:0402_cc | L9 |
| 1 | 43nH | libs:0402_cc | L23 |
| 1 | 47 | libs:0603murata2 | R18 |
| 1 | 56pF | libs:0402_cc | C103 |
| 1 | 6.2pF | libs:0402_cc | C115 |
| 1 | 6.8 pF | libs:0603murata2 | C159 |
| 1 | 6.8nH | libs:0603murata2 | L29 |
| 1 | 75 nH | libs:0402_cc | L10 |
| 1 | ADT7420 | ADT7420:ADT7420 | U12 |
| 1 | CONN_02X03 | hrs-df11:hrs-df11-6dp-2dsa | EPS |
| 1 | Crystal | libs:ABS07crystal | Y2 |
| 1 | Crystal | libs:ABM3crystal | Y1 |
| 1 | LOGO | libs:upsat-logo | G*** |
| 1 | LOGO | w_logo:Logo_silk_OSHW_12x13mm | G*** |
| 1 | OBC | hrs-df11:hrs-df11-6dp-2dsa | OBC |
| 1 | OPA320 | w_smd_trans:sot23-5 | U14 |
| 1 | RF5110G | RF5110G:RF5110G | U16 |
| 1 | STM32F407VG | STM32F407VGT6:TQFP-100 | U5 |
| 1 | SWD | hrs-df11:hrs-df11-6dp-2dsa | SWD |
| 1 | TBD | libs:0603murata2 | C157 |
The 193 most common of 314 parts.
Questions
How big is the Upsat comms hardware PCB?
It measures 92.5 × 92.5 mm and has 4 copper layers, 1.55 mm thick.
What parts does the Upsat comms hardware use?
314 parts, built around the STM32F407VGT6, RF5110GTR7, ADT7420UCP and CC1120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Upsat comms hardware KiCad files?
From the Ki365/upsat-comms-hardware repository on GitHub, at the commit this page was made from: the board is upsat-comms-hardware.kicad_pcb and its schematic upsat-comms-hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Upsat comms hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ki365 before reusing the design.
Similar boards
- 2 layers11 × 20 mm
Adt7420
PlantFactory/kicad-ANTS_ADT7420
ANTS ADT7420 dry/wet temperature sensor compatible board using ADT7420.
8 parts - 2 layers12.7 × 30.5 mm
Temperature humidity
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
16 parts55 - 4 layers40.9 × 24.9 mm
- 4 layers81 × 55 mm
- 4 layers100 × 99.9 mm
- 4 layers40 × 40 mm
- 2 layers57.2 × 27.9 mm
