Skip to the content
2 layers74.9 × 39.4 mmProjectFiles, the printed circuit board in 3D

This repository contains the design and implementation of the sensing and power subsystems for a micromouse project.

Size
74.9 × 39.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
23
Pads
93
Tracks, vias
202, 19
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Mar 2024
Updated
17 May 2024

Overview

ProjectFiles is an open-source printed circuit board by khnmuhaimin, from the khnmuhaimin/EEE3088F-Group-64 repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.9 × 39.4 mm with 28 parts on 23 nets, routed with 202 tracks and 19 vias.

It is built around the DRV8837DSGT-TP, AO3401A and KT-0603R, with the MS-22D28-G020 and TP4056 among its other parts. Its parts include 6 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes.

Main components

5

README

README.md

EEE3088F Micromouse Design Project

Overview

This repository contains the design and implementation of the sensing and power subsystems for a micromouse project. The sensing subsystem is responsible for detecting walls and approximating distances to these walls using infrared (IR) sensors. The power subsystem is responsible for supplying power to the rest of the micromouse and controlling the motors used to move the micromouse around. This README provides an overview of the project.

General Micromouse Features

  • Wall Detection: Detects the presence of walls in three directions: forwards, left, and right.
  • PCB Design: Includes the design of a custom PCB that integrates with the micromouse.
  • Autonomous Navigation: Explores and solves a maze autonomously.

Necessary Additional Components

  • STM32L476 microcontroller
  • Motherboard PCB with PIN connections
  • Wheels and motors for movement (multi-rotational drawing approximately 200mA each
  • Battery LiPo 800mAh 3.7V
  • Battery, Power and Sensing headers need to be purchased and soldered on during assembly
  • 5V Power supply for charging
  • Device capable of running MATLAB

Installation

  1. Clone the repository:

    text
    git clone https://github.com/khnmuhaimin/EEE3088F-Group-64.git
  2. Navigate to the project directory:

    text
    cd EEE3088F-Group-64
  3. Use KiCad to open up the project files for the custom PCB design.

License

This project is licensed under the MIT License. See the LICENSE file for details.

Contributors (Group 64)

  • Luke Carter(CRTLUK001)
  • Muhaimin Khan(KHNMUH063)

Parts

28
QtyValueFootprintReferences
4100nFLibrary:CAPC1005X55NC3, C4, C5, C6
31kLibrary:RESC2013X65NR1k2, R1k3, R1k4
2C10uFLibrary:CAPC2012X145NC1, C2
2DRV8837DSGTLibrary:SON50P200X200X80-9NIC1, IC2
2R0805 1MLibrary:RESC2013X65N2R1, R2
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
11.5kLibrary:RESC2013X65NR1k1
12x8_ConnectionsConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ1
15vTestPoint:TestPoint_Pad_D2.5mmTP1
1AO3401ALibrary:SOT95P280X125-3NQ1
1BATTTestPoint:TestPoint_Pad_D2.5mmTP2
1BATT_OutputTestPoint:TestPoint_Pad_D2.5mmTP5
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ3
1GNDTestPoint:TestPoint_Pad_D2.5mmTP6
1KT-0603RLibrary:LEDC1608X70NLED2
1KT-0605GLibrary:LEDC1608X70NLED1
1MS-22D28-G020Library:MS22D28G020S1
1TP4056Library:SOIC127P600X175-9NJ2
1switchTestPoint:TestPoint_Pad_D2.5mmTP3

More from khnmuhaimin/EEE3088F-Group-64

1
  • 2 layers74.5 × 40.5 mmSensing, the printed circuit board in 3D

    Sensing

    khnmuhaimin/EEE3088F-Group-64

    This repository contains the design and implementation of the sensing and power subsystems for a micromouse project.

    26 partsMIT

Similar boards

  • 2 layers76 × 63.5 mmPicoTracker, the printed circuit board in 3D

    PicoTracker

    xiphonics/picoTracker-pcb

    Buy the official kit at xiphonics store # Trademark Notice

    98 parts36CC0-1.0
  • 4 layers136.3 × 71.1 mmMSign, the printed circuit board in 3D

    MSign

    mincrmatt12/MSign

    internet-connected led sign control system

    169 parts11MIT
  • 2 layers39.5 × 11.4 mmJumper switches smd, the printed circuit board in 3D

    Jumper switches smd

    silasstokes/header_pins_to_switches_adapter

    A compact SMD PCB adapter that replaces traditional 2.54mm header pin jumpers with four labeled slide switches. No more fumbling with tiny jumper caps or searching for pliers.

    5 parts
  • 2 layers50 × 70 mmFPCB, the printed circuit board in 3D

    FPCB

    Kiya86/Terasaki-Main-

    74 parts
  • 2 layers64 × 37 mmBefore silk, the printed circuit board in 3D

    Before silk

    mitra42/frugal-iot-hw-sensor

    A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antenna.

    67 parts
  • 4 layers32.4 × 40.2 mmSmartwatch, the printed circuit board in 3D

    Smartwatch

    Pedro-Seixas/Smartwatch

    A custom-designed smartwatch built around the ESP32-S3, combining BLE connectivity, a rectangular touch display, recharge capability, IMU and temperature sensors. Designed from the ground up in KiCad.

    55 partsMIT
  • 4 layers65 × 56 mmPi hat ups, the printed circuit board in 3D

    Pi hat ups

    Doenec/pi-hat

    collection of different shields to be stacked in raspberry pi

    80 parts1MIT
  • 4 layers65 × 45 mmLora gps tracker rev a, the printed circuit board in 3D

    Lora gps tracker rev a

    bogdan-kovalchuk/esp32-lora-gps-tracker

    Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.

    69 partsMIT

Questions

How big is the ProjectFiles PCB?

It measures 74.9 × 39.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ProjectFiles use?

28 parts, built around the DRV8837DSGT-TP, AO3401A, KT-0603R and MS-22D28-G020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ProjectFiles KiCad files?

From the khnmuhaimin/EEE3088F-Group-64 repository on GitHub, at the commit this page was made from: the board is power/Project Files V3/ProjectFiles/ProjectFiles.kicad_pcb and its schematic power/Project Files V1/ProjectFiles.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ProjectFiles design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).