

Flippie
- Size
- 149.1 × 109.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 80
- Pads
- 663
- Tracks, vias
- 204, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Jun 2024
- Updated
- 5 Aug 2024
Overview
Flippie is an open-source printed circuit board by khemingkapat, from the khemingkapat/flippie repository on GitHub. It is a 2-layer board of 149.1 × 109.9 mm with 65 parts on 80 nets, routed with 204 tracks and 0 vias.
Its parts include 36 switches and 18 diodes.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | MX | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20 | |
| 18 | ComboDiode | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 | |
| 5 | — | ceoloide:mounting_hole_plated | H1, H2, H3, H4, H5 |
| 1 | — | ceoloide:mcu_nice_nano | MCU1 |
| 1 | — | ceoloide:display_ssd1306 | DISP1 |
| 1 | — | ceoloide:reset_switch_tht_top | RST1 |
| 1 | — | ceoloide:battery_connector_jst_ph_2 | JST1 |
| 1 | — | ceoloide:power_switch_smd_side | PWR1 |
The 64 most common of 65 parts.
Similar boards
- 2 layers42 × 67 mm

- 2 layers198.1 × 30.5 mm

Splitflap driver
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
65 parts744MIT - 2 layers74.8 × 32.5 mm

- 2 layers60 × 100 mm

V3 Connector Only
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
65 parts439GPL-2.0 - 2 layers45 × 58.2 mm

- 2 layers27.9 × 101.6 mm

- 2 layers40 × 120 mm

Photodiode board v3
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
65 parts151MIT - 2 layers78 × 130 mm

Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT
Questions
How big is the Flippie PCB?
It measures 149.1 × 109.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flippie use?
65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flippie KiCad files?
From the khemingkapat/flippie repository on GitHub, at the commit this page was made from: the board is output/pcbs/flippie.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flippie design in my own project?
Its repository states no licence, so its author keeps all rights: ask khemingkapat before reusing the design.