
Pico LoRa
ElektorLabs/210047-LoRa-with-the-Raspberry-Pi-Pico
Raspberry Pi Pico with a RFM95 and DS18B20

[MOVED to GitLab: https://gitlab.com//r3xxar/ePozytywka]
EPozytywka is an open-source printed circuit board by KhazAkar, from the KhazAkar/ePozytywka repository on GitHub. It is a 2-layer board of 100 × 70 mm with 56 parts on 52 nets, routed with 155 tracks and 15 vias.
It is built around the MCP73871-1CCI/ML. Its parts include 16 capacitors, 12 resistors, 5 connectors, 4 ICs and 1 crystal. It belongs with the STM32 boards of this library.
Odtwarzacz MP3 oparty o STM32F030, wyświetlacz TFT dotykowy i moduł DFPlayer Mini do odtwarzania plików MP3
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R10, R11, R12 |
| 4 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C7, C10, C12 |
| 4 | 22n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C8, C15, C16 |
| 4 | 4u7 | Capacitor_SMD:CP_Elec_4x5.3 | C3, C6, C13, C14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 20k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R9 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 2 | 270 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 22u | Capacitor_SMD:CP_Elec_4x5.3 | C11 |
| 1 | 560k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 8M | Crystal:Crystal_SMD_TXC_7A-2Pin_5x3.2mm | Y1 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BLM21PG221SH1D | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | DFP_RX_TP | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | DFP_TX_TP | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | DFPlayer_Mini | DFPlayer:DFPlayer_Mini | U2 |
| 1 | GND_TP | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | LCD_CS_TP | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Li-Ion | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Lid Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | MCP73871-1CC | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | MISO_TP | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | MOSI_TP | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | SCK_TP | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | T_CS_TP | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | Touch LCD | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Micro_B_AMP:AMPHENOL_10118192-0001LF | J5 |
| 1 | VCC_TP | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | Vbat_TP | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | YD78 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | ~RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |

ElektorLabs/210047-LoRa-with-the-Raspberry-Pi-Pico
Raspberry Pi Pico with a RFM95 and DS18B20

lucapoulos/minimap
See our final report for a technical overview of the demo we presented.


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the MCP73871-1CCI/ML. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KhazAkar/ePozytywka repository on GitHub, at the commit this page was made from: the board is ePozytywka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KhazAkar before reusing the design.