2 layers309.6 × 95.3 mm
Macrolev
heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches
184 parts136
2 layers68.6 × 53.3 mm
KiCAD and Arduino sketch files for a known good Arduino to test the functionality of a second board.
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 68
- Pads
- 110
- Tracks, vias
- 284, 24
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Dec 2016
- Updated
- 26 Dec 2016
Overview
Slave is an open-source printed circuit board by kevinsa5, from the kevinsa5/ArduinoTestShield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 11 parts on 68 nets, routed with 284 tracks and 24 vias.
It is built around the CD74HC4067SM96. Its parts include 9 connectors and 2 ICs.
Main components
1README
README.mdArduinoTestShield
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 2 | CD74HC4067SM96 | Housings_SOIC:SOIC-24W_7.5x15.4mm_Pitch1.27mm | U1, U2 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | CONN_02X13 | Pin_Headers:Pin_Header_Straight_2x13 | P9 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
Questions
How big is the Slave PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Slave use?
11 parts, built around the CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slave KiCad files?
From the kevinsa5/ArduinoTestShield repository on GitHub, at the commit this page was made from: the board is hardware/slave/slave.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slave design in my own project?
Its repository states no licence, so its author keeps all rights: ask kevinsa5 before reusing the design.
Similar boards
- 2 layers204 × 174.9 mm
- 4 layers65 × 100 mm
- 4 layers344 × 117.5 mm
- 2 layers229 × 96 mm
Oscillator Board
Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine
138 parts19 - 4 layers29.3 × 187.1 mm
Left Frame
FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
127 parts14 - 2 layers391.2 × 166.5 mm
Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 2 layers100 × 55 mm
PCBTriatlonWAY
Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
43 parts6