Skip to the content
2 layers152.4 × 115.2 mmChallenger, the printed circuit board in 3D

A gaming keypad balancing precision and ergonomics.

Size
152.4 × 115.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
59
Pads
361
Tracks, vias
326, 42
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Jul 2026
Updated
27 Sep 2026

Overview

Challenger is an open-source printed circuit board by kevinpastor, from the kevinpastor/challenger repository on GitHub, published under the MIT licence. It is a 2-layer board of 152.4 × 115.2 mm with 75 parts on 59 nets, routed with 326 tracks and 42 vias.

Its parts include 37 switches, 35 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Challenger

A 35-key gaming keypad powered by ZMK.

Features

  • 35 MX-compatible keys
  • Wireless (nice!nano)
  • nice!view display
  • Hotswap sockets

Bill of Materials

PCB

QtyPartDescription
1Challenger PCB
35MX switches (of your choice)
35Kailh MX hot-swap socketsSwitch sockets
351N4148W diodesSMD switch diodes
1nice!nano v2Wireless microcontroller
2Mill-Max 315-43-112-41-003000Female header, 12-pin, microcontroller socket
2Mill-Max 350-10-112-00-006000Pin header, 12-pin, microcontroller socket
1Panasonic EVQ-PUL02KTactile switch, as the reset button
1Alps Alpine SSSS811101Slide switch, as the power switch
13.7v 110mAh 301230 LiPo batteryPositive terminal must be on the right side of the connector
1JST S2B-PH-K-SBattery connector, 2-pin

The EVQ-PUJ02K, the EVQ-PUA02K, or the EVQ-PUC02K could be used instead for the reset button, since they only differ in operating force or boss (aligning plastic tab on the underside).

The battery connector model number can have a different last letter or no at all (e.g. S2B-PH-K-K, S2B-PH-K-H, S2B-PH-K), which only represents its color.

Case

QtyPartDescription
1Switch plate PCB
1Bottom plate PCB
4M2 x 7 mm standoffsCase standoffs
8M2 x 5 mm screwsCase screws

M2 x 4 mm screws might be able to be used instead of the M2 x 5 mm screws.

Display

The display cover has not been designed yet. Some parts listed are for future reference.

QtyPartDescription
1nice!viewDisplay
2M2 x 10 mm standoffsCover standoffs
2M2 x 5 mm screwsCover standoff screws

M2 x 4 mm screws might be able to be used instead of the M2 x 5 mm screws.

Firmware

Built with ZMK.

License

MIT

Parts

75
QtyValueFootprintReferences
351N4148challenger:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19
34SW_Push_45degchallenger:Hotswap_MX_1.00uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +18
1Battery_Cellchallenger:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalBT1
1ProMicrochallenger:nice_nanoU1
1SW_Pushchallenger:Panasonic_EVQPUL_EVQPUCSW37
1SW_Push_45degchallenger:Hotswap_MX_1.50uSW35
1SW_SPDTchallenger:SW_SPDT_PCM12SW36
1nice!viewchallenger:nice_viewDisplay1

Similar boards

  • 2 layers105.4 × 215.6 mmMIDI Sax, the printed circuit board in 3D

    MIDI Sax

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    75 parts915
  • 2 layers74.4 × 101.1 mmVoron badge, the printed circuit board in 3D

    Voron badge

    tanaes/whopping_Voron_mods

    75 parts787GPL-3.0
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers40.1 × 107.1 mmLogiverter, the printed circuit board in 3D

    Logiverter

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    75 parts208
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146
  • 2 layers134 × 96 mmSgkb, the printed circuit board in 3D

    Sgkb

    sago35/tinygo-keyboard

    USB HID keyboard firmware for tinygo

    75 parts119MIT
  • 2 layers50 × 33.5 mmPolyspecusb, the printed circuit board in 3D

    Polyspecusb

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    75 parts114
  • 2 layers50 × 100 mmOvercurrent, the printed circuit board in 3D

    Overcurrent

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    75 parts75

Questions

How big is the Challenger PCB?

It measures 152.4 × 115.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Challenger use?

75 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Challenger KiCad files?

From the kevinpastor/challenger repository on GitHub, at the commit this page was made from: the board is pcb/challenger.kicad_pcb and its schematic pcb/challenger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Challenger design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).