2 layers66 × 15.2 mm
2 layers61.2 × 65 mm
GarageMainBoard
kevinkessler/GarageServerPi-PCB- Size
- 61.2 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 34
- Pads
- 159
- Tracks, vias
- 383, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jan 2018
- Updated
- 7 Apr 2018
Overview
GarageMainBoard is an open-source printed circuit board by kevinkessler, from the kevinkessler/GarageServerPi-PCB repository on GitHub. It is a 2-layer board of 61.2 × 65 mm with 45 parts on 34 nets, routed with 383 tracks and 31 vias.
It is built around the MC74HC365AD, MC74VHC1GT50DF and CPDV5-3V3UP, with the IRLML6344 and RJ45 among its other parts. Its parts include 16 resistors, 7 connectors, 5 capacitors, 5 ICs and 3 transistors.
Main components
5
MC74HC365AD
SOIC-16-55℃~+125℃ 1 160uA 2V~6V 6 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-16 Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, Transceivers
MC74VHC1GT50DF
SC-88A-55℃~+125℃ 1 1 2V~5.5V 4.5ns@4.5V,50pF 40uA 8mA 8mA SC-88A Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, Transceivers
CPDV5-3V3UP
SOT-353-55℃~+125℃ 12pF 3.3V 3.5V 40W@8/20us 50nA 5A@8/20us 8V Bidirectional ESD IEC 61000-4-2 SOT-353 ESD and Surge Protection (TVS/ESD) ROHSComchipESD And Surge Protection (TVS/ESD)
IRLML6344
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC@4.5V 650pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdPCBs for the Garage Server Pi Project
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R8, R10, R12 |
| 4 | 1K | Resistors_SMD:R_0805_HandSoldering | R7, R13, R15, R16 |
| 4 | MOUNTHOLE | KevinLib:TH-M3 | MP1, MP2, MP3, MP4 |
| 3 | 100K | Resistors_SMD:R_0805_HandSoldering | R9, R11, R14 |
| 3 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C5 |
| 3 | IRLML6344 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3 |
| 2 | CPDV5-3V3UP | TO_SOT_Packages_SMD:SOT-353_SC-70-5_Handsoldering | U2, U3 |
| 2 | RJ45 | KevinLibrary:RJ45_LOW_PROFILE_NO_CUT | J5, J6 |
| 1 | 100 | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 220u | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 5V Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J7 |
| 1 | Barrel_Jack | Connectors:BARREL_JACK | J2 |
| 1 | Buzzer | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | Conn_02x13_Odd_Even | Pin_Headers:Pin_Header_Straight_2x13_Pitch2.54mm | J3 |
| 1 | Front_Panel_Connector | Connectors_JST:JST_PH_B8B-PH-K_08x2.00mm_Straight | J4 |
| 1 | MC74HC365A | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | MC74VHC1GT50 | TO_SOT_Packages_SMD:SOT-353_SC-70-5_Handsoldering | U5 |
| 1 | TVS 20VDC | Diodes_SMD:D_SMB | U4 |
The 41 most common of 45 parts.
More from kevinkessler/GarageServerPi-PCB
3- 2 layers15.2 × 26.7 mm
- 2 layers6.3 × 2.5 mm
Similar boards
- 4 layers65 × 75 mm
HomeAssistant
WojciechM98/Home-assistant-ESP32
Home assistand board using ESP32 controlled with MQTT protocol.
151 parts - 4 layers70 × 70 mm
1.Electronics
I-M-Robotics-Lab/STM32-Quadcopter
Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.
57 parts80GPL-3.0 - 2 layers86 × 86 mm
Production
kerikun11/IR-Station
Infrared Remote Controller with ESP8266 WiFi-module. You can control your home appliances with your smartphone or laptop.
128 parts54MIT - 2 layers99.8 × 99.8 mm
Stmbl 5.0
freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
432 parts53GPL-3.0 - 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers61.4 × 103.3 mm
HB Dis EP-42BW
jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
45 parts18 - 2 layers45.8 × 40.2 mm
GoProControl
synfinatic/GoProControl
GoPro WiFi controller board using an ESP8266 allowing easy integration with other circuits
27 parts13GPL-3.0 - 2 layers70 × 40 mm
Questions
How big is the GarageMainBoard PCB?
It measures 61.2 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GarageMainBoard use?
45 parts, built around the MC74HC365AD, MC74VHC1GT50DF, CPDV5-3V3UP and IRLML6344. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GarageMainBoard KiCad files?
From the kevinkessler/GarageServerPi-PCB repository on GitHub, at the commit this page was made from: the board is GarageMainBoard/GarageMainBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GarageMainBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask kevinkessler before reusing the design.