
CyberKeeb2040
zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

assembly guide - print and assemble TWO of these boards(you dont need the MCU on the second board but id want to get rid of it so ehh) - get your lipo battery and mini step down converter - solder all the headers…
Gadget is an open-source printed circuit board by kermitsgonnakermicide, from the kermitsgonnakermicide/LED-Cube repository on GitHub. It is a 2-layer board of 69.4 × 71.2 mm with 50 parts on 26 nets, routed with 498 tracks and 39 vias.
It is built around the WS2812. Its parts include 27 diodes, 13 connectors, 2 capacitors, 1 resistor and 1 IC. It belongs with the RISC-V boards of this library.
it is led. it is cube. it is soup
assembly guide
bibi netanyahu
schematic
3d
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | WS2812 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D55, D55, D55, D56, D56, D56, D57, D57, D57, D58, D58, D58, D59, D59, D59, D60 +11 |
| 13 | Conn_01x04_Pin | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1, J1, J1, J2, J2, J2, J3, J3, J3, J4, J4, J4, J5 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | CH32V003JxMx | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
The 45 most common of 50 parts.

zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor


cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering



It measures 69.4 × 71.2 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kermitsgonnakermicide/LED-Cube repository on GitHub, at the commit this page was made from: the board is gadget.kicad_pcb and its schematic gadget.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kermitsgonnakermicide before reusing the design.