2 layers13.1 × 2.1 mm
2 layers100.7 × 62.9 mm
Buisness Card
KenwoodFox/ProtoCard1A protoboard-buisness card combo!
- Size
- 100.7 × 62.9 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 35
- Nets
- 21
- Pads
- 397
- Tracks, vias
- 168, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Aug 2022
- Updated
- 28 Jun 2023
Overview
Buisness Card is an open-source printed circuit board by KenwoodFox, from the KenwoodFox/ProtoCard repository on GitHub. It is a 2-layer board of 100.7 × 62.9 mm with 35 parts on 21 nets, routed with 168 tracks and 24 vias.
It is built around the ATTINY85-20SU and MBR0520L-TP. Its parts include 5 resistors, 5 diodes, 5 connectors, 4 capacitors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MBR0520L-TP
SOD-123-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
README
README.mdParts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H101, H102, H103 |
| 3 | USB_A | Connectors:usb-PCB | J101, P1, P1 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R104, R105 |
| 2 | 3.6 Zener | Diode_SMD:D_0805_2012Metric | D101, D102 |
| 2 | 68R | Resistor_SMD:R_0805_2012Metric | R102, R103 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP101, JP102 |
| 1 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C104 |
| 1 | 0.1μf | Capacitor_SMD:C_0805_2012Metric | C102 |
| 1 | 1K5 | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | 1μf | Capacitor_SMD:C_0805_2012Metric | C101 |
| 1 | 5pf | Capacitor_SMD:C_0805_2012Metric | C103 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U102 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J102 |
| 1 | LOGO | Aesthetics:pcbway20x8 | G*** |
| 1 | LOGO | BuisnessCardSpecial:ProtoCard | G*** |
| 1 | LOGO | KenwoodFox:KITSUNE_LOGO | G*** |
| 1 | LOGO | BuisnessCardSpecial:JLCPCB | G*** |
| 1 | MBR0520LT | Diode_SMD:D_SOD-123 | D105 |
| 1 | NCP1117-12_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U101 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D104 |
| 1 | ProtoBoard | BuisnessCardSpecial:ProtoBoardLayout | U103 |
| 1 | SDI | LED_SMD:LED_0805_2012Metric | D103 |
| 1 | Tag Connect | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J103 |
| 1 | VAL** | Panelization:mouse-bite-5mm-slot | mouse-bite-5mm-slot |
The 32 most common of 35 parts.
Questions
How big is the Buisness Card PCB?
It measures 100.7 × 62.9 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Buisness Card use?
35 parts, built around the ATTINY85-20SU and MBR0520L-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buisness Card KiCad files?
From the KenwoodFox/ProtoCard repository on GitHub, at the commit this page was made from: the board is Hardware/Buisness Card/Buisness Card.kicad_pcb and its schematic Hardware/Buisness Card/Buisness Card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buisness Card design in my own project?
Its repository states no licence, so its author keeps all rights: ask KenwoodFox before reusing the design.
Similar boards
- 2 layers
Circular PCB
ChowdaryManyam/ATtiny-Chainy
As an OSHWA-certified project, ATtiny-Chainy adheres to the open-source hardware definition, ensuring transparency, collaboration, and accessibility for the maker community.
24 parts1MIT - 2 layers70.9 × 45.6 mm
- 2 layers82 × 52 mm
EmoePower V1.0
emoestudio/EmoePower
A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.
72 parts20GPL-3.0 - 2 layers54.5 × 37 mm
- 4 layers160 × 99.5 mm
High Current Driver
Strathclyde-EQOP/Vernier-Current-Driver
The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:
248 parts9CC-BY-SA-4.0 - 2 layers35 × 75 mm
- 2 layers60.8 × 31 mm
