2 layers54 × 15 mm
Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT
2 layers54.5 × 37 mm
GPIB Serial Adapter
essele/yaugi17Yet Another USB GPIB Interface
- Size
- 54.5 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 51
- Pads
- 129
- Tracks, vias
- 284, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2019
- Updated
- 27 Oct 2019
Overview
GPIB Serial Adapter is an open-source printed circuit board by essele, from the essele/yaugi repository on GitHub. It is a 2-layer board of 54.5 × 37 mm with 20 parts on 51 nets, routed with 284 tracks and 19 vias.
It is built around the CY8C4246AZI-L433, 112-024-113R001 and MBR0520L-TP. Its parts include 8 capacitors, 3 resistors, 3 diodes, 3 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
3
CY8C4246AZI-L433
TQFP-48(7x7)1.71V~5.5V 12bit 38 48MHz 64KB 8bit ARM Cortex-M0 FLASH TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSInfineon TechnologiesMicrocontrollers (MCU/MPU/SOC)
112-024-113R001
插件插件 New Arrivals ROHSNorCompUncategorised
MBR0520L-TP
SOD-123-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
README
README.mdYAUGI -- Yet Another USB GPIB Interface
Disclaimer
This is an experimental device and experimental code, it has not been fully tested and may damage your equipment. Please do not attempt to use this device and code unless you know what you are doing.
I can accept no liability whatsoever for any damage caused.
Introduction
Details to follow ... however:
The PCB KiCAD files are in the KiCAD directory
The code, which is a PSoC Creator project is in the "GPIB USB Adapter" directory.
This is work in progress and will be documented over time.
Errata
The PCB is a test board and as such has a number of issues, most notibly:
- the shield of the IEE488 connector is not connected to the USB shield
- the IEE488 connector needs to be populated on the back of the board
The code is absoultely work-in-progress so lots of things won't work and this will change over time.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C2, C4, C7, C9 |
| 3 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C3, C8, C10 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R2, R3 |
| 2 | LED | LEDs:LED_0805_HandSoldering | D2, D3 |
| 1 | 0.01uF | Capacitors_SMD:C_0603_HandSoldering | C1 |
| 1 | 0.5A 16V | Resistors_SMD:R_1210_HandSoldering | F1 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 112-024-113R001 | Project:112-024-113R001 | J1 |
| 1 | CY8C4246AZI-L433 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | MBR0520LT | Diodes_SMD:D_SOD-123 | D1 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm | J3 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h8mm | SW1 |
| 1 | USB_B_Mini | Connectors:USB_Mini-B | J2 |
Questions
How big is the GPIB Serial Adapter PCB?
It measures 54.5 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GPIB Serial Adapter use?
20 parts, built around the CY8C4246AZI-L433, 112-024-113R001 and MBR0520L-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GPIB Serial Adapter KiCad files?
From the essele/yaugi repository on GitHub, at the commit this page was made from: the board is KiCad/GPIB Serial Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GPIB Serial Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask essele before reusing the design.
Similar boards
- 6 layers60 × 55 mm
PoE Ethernet GPIB Adapter
Kofen/PoE_Ethernet_GPIB_Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
198 parts120GPL-3.0 - 2 layers33 × 57.4 mm
CareLite V122
OpenhimerLab/CareLite-GPIB
CareLite is an open-source, tiny, small USB-GPIB adaptor based on STM32 with temperature sensors.
37 parts9GPL-3.0 - 4 layers55.1 × 58 mm
LINC
noahhusby/LINC
The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment
39 parts1CERN-OHL-P-2.0 - 4 layers62 × 67 mm
Adapter
tridentsx/tmc-gateway
TinyGo firmware for an RP2350-based USB/PoE-LAN instrument gateway: bridges USBTMC/USB488 and HiSLIP to GPIB
92 parts - 2 layers51.7 × 66 mm
- 2 layers70.9 × 45.6 mm
- 2 layers82 × 52 mm
EmoePower V1.0
emoestudio/EmoePower
A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.
72 parts20GPL-3.0