
Kickstart switcher-12up
keirf/pcb-projects
The old Kickstart switcher documentation is here.

The old Kickstart switcher documentation is here.
27c322-2up is an open-source printed circuit board by keirf, from the keirf/pcb-projects repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 96.5 × 99.7 mm with 35 parts on 54 nets, routed with 825 tracks and 63 vias.
It is built around the MMBT3906. Its parts include 12 resistors, 9 connectors, 6 ICs, 3 transistors and 3 switches.
The old Kickstart switcher documentation is here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistors_SMD:R_0805_HandSoldering | R1, R1, R1, R2, R2, R2, R3, R3, R3, R4, R4, R4 |
| 3 | 27C322 | FF:27C160 | U2, U2, U2 |
| 3 | 27C4096 | FF:27C4096 | U1, U1, U1 |
| 3 | A18 | Pin_Headers:Pin_Header_Straight_1x03 | P2, P2, P2 |
| 3 | A19 | Pin_Headers:Pin_Header_Straight_1x03 | P1, P1, P1 |
| 3 | A20 | Pin_Headers:Pin_Header_Straight_1x03 | P3, P3, P3 |
| 3 | MMBT3906 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q1, Q1 |
| 3 | Switch_SPDT_x2 | FF:SW_PUSH_x2 | SW1, SW1, SW1 |
| 2 | FF:mousebite | , |

keirf/pcb-projects
The old Kickstart switcher documentation is here.


keirf/pcb-projects
The old Kickstart switcher documentation is here.


keirf/pcb-projects
The old Kickstart switcher documentation is here.


keirf/pcb-projects
The old Kickstart switcher documentation is here.






fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.


MatthiasElectronic/AWG_DHO8-900
artificial waveform generator / function generator for DHO800 and DHO900 series (AWG/AFG)


mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules


It measures 96.5 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keirf/pcb-projects repository on GitHub, at the commit this page was made from: the board is panels/27c322-2up.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).