

SwarmBot
- Size
- 74.2 × 5.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 63
- Pads
- 310
- Tracks, vias
- 665, 208
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Oct 2019
- Updated
- 26 Oct 2019
Overview
SwarmBot is an open-source printed circuit board by keionbis, from the keionbis/WhiteboardSwarm repository on GitHub. It is a 2-layer board of 74.2 × 5.5 mm with 74 parts on 63 nets, routed with 665 tracks and 208 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-PICO-D4 and A3916GESTR-T, with the LSM6DS3, MIC5366-3.3YC5-TR and MMBT3904 among its other parts. Its parts include 21 capacitors, 18 resistors, 8 ICs, 8 connectors and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
7CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsA3916GESTR-T
WQFN-16-EP(3x3)-40℃~+105℃ 1A 2 2 2.7V~15V 450mΩ Bipolar Driver Yes WQFN-16-EP(3x3) Stepper Motor Driver ROHSAllegro MicroSystems, LLCStepper Motor DriverLSM6DS3
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 8KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersMIC5366-3.3YC5-TR
SC-70-5-40℃~+125℃@(Tj) 1 150mA 155mV@(150mA) 200uVrms 29uA 3.3V 5.5V Fixed Over Current Protection、Over Temperature Protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)2450AT18B100E
1206-45℃~+125℃ 0.5dBi 1.3mm 1.6mm 100MHz 2.45GHz 2W 3.2mm 50Ω Patch Antenna 1206 Antennas ROHSJohanson DielectricsAntennas
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21 +2 |
| 12 | R | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 10 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 6 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R8, R9 |
| 3 | A3916GESTR-T | A3916GESTR-T:QFN50P300X300X75-17N-D | IC2, IC3, IC4 |
| 3 | C | Capacitor_SMD:C_0805_2012Metric | C7, C8, C15 |
| 2 | Conn_01x06_Female | Connector_PinSocket_2.00mm:PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Left | J2, J3 |
| 2 | Conn_01x06_Female | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical_SMD_Pin1Right | J4, J5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push_Open | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1, SW2 |
| 1 | 2450AT18B100E | 2450AT18B100E:ANT_2450AT18B100E | ANT1 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
| 1 | Conn_01x04_Female | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | Conn_01x08_Female | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J6 |
| 1 | ESP32-PICO-D4 | ESP32-PICO-D4:ESP32-PICO-D4_1 | IC1 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | L | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MIC5366-3.3YC5 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J7 |
Similar boards
- 4 layers

- 2 layers63.5 × 30.5 mm

- 4 layers40.6 × 43.2 mm

- 4 layers41.7 × 30.5 mm

Project STM32
edenbwt/STM32_Learning
This repository contains my KiCad files and projects for learning microelectronics and STM32 MCU development.
34 parts - 4 layers82.5 × 35 mm

Co2 7seg
morzack/CO2-PCB-Monitor
Design and manufacturing files for a desktop atmospheric CO2 monitor
45 parts - 4 layers118.4 × 131 mm

Nifty Numpad before sockets
Acliad/Nifty-Numpad
Full sized numpad with an extra row and two extra columns of macro keys. It was created as a companion to my TKL keyboard for CAD design.
175 parts - 4 layers69.8 × 69.8 mm

FreeEEG32
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
217 parts39AGPL-3.0 - 2 layers96.9 × 61.6 mm

Ccb
omelia-iliffe/creature-control-board
Use this circuit board to create your own creatures!
90 parts4MIT
Questions
How big is the SwarmBot PCB?
It measures 74.2 × 5.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SwarmBot use?
74 parts, built around the CP2102N-A01-GQFN24, ESP32-PICO-D4, A3916GESTR-T and LSM6DS3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SwarmBot KiCad files?
From the keionbis/WhiteboardSwarm repository on GitHub, at the commit this page was made from: the board is SwarmBot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SwarmBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask keionbis before reusing the design.