2 layers80 × 80 mm
2 layers20.5 × 10.5 mm
Mg90DSmartController
keionbis/ServoControllerRev21- Size
- 20.5 × 10.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 28
- Pads
- 37
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jul 2018
- Updated
- 11 Feb 2019
Overview
Mg90DSmartController is an open-source printed circuit board by keionbis, from the keionbis/ServoControllerRev2 repository on GitHub. It is a 2-layer board of 20.5 × 10.5 mm with 3 parts on 28 nets.
Its parts include 2 connectors and 1 IC. It belongs with the STM32 boards of this library.
README
motor controller Serial/README.mdServoControllerRev2
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x04_Male | Connector_Molex:Molex_CLIK-Mate_502382-0470_1x04-1MP_P1.25mm_Vertical | J1, J2 |
| 1 | STM32L011F4Ux | Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm | U1 |
Questions
How big is the Mg90DSmartController PCB?
It measures 20.5 × 10.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mg90DSmartController use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mg90DSmartController KiCad files?
From the keionbis/ServoControllerRev2 repository on GitHub, at the commit this page was made from: the board is motor controller SPI (Right Angle)/mg90DSmartController/mg90DSmartController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mg90DSmartController design in my own project?
Its repository states no licence, so its author keeps all rights: ask keionbis before reusing the design.
More from keionbis/ServoControllerRev2
5- 2 layers21 × 10.5 mm
- 2 layers38 × 18 mm
- 4 layers38 × 18 mm
- 4 layers21 × 10.5 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT