Skip to the content
4 layers80 × 76.7 mmPower board, the printed circuit board in 3D

PCB design of power management board for KEA Goes Deep's ROV

Size
80 × 76.7 mm
Copper layers
4
Thickness
1.6 mm
Parts
112
Nets
20
Pads
216
Tracks, vias
216, 11
Pours
8
Routed
Yes
KiCad
KiCad 4
Created
31 Oct 2017
Updated
10 Apr 2018

Overview

Power board is an open-source printed circuit board by keagoesdeep, from the keagoesdeep/powerBoard_PCB repository on GitHub. It is a 4-layer board of 80 × 76.7 mm with 112 parts on 20 nets, routed with 216 tracks and 11 vias.

It is built around the IRF540S-VB and STPS20M100SR. Its parts include 26 connectors, 21 capacitors, 9 resistors, 4 transistors and 3 diodes.

Main components

2

README

README.md

powerBoard_PCB

PCB design of power management board for KEA Goes Deep's ROV

Parts

112
QtyValueFootprintReferences
45 MB_LIB:via , , , , , , , , , , , , , , , +29
10Conn_01x01MB_LIB:via_sqJ1, J3, J5, J7, J9, J11, J13, J15, J23, J25
10Conn_01x01MB_LIB:viaJ2, J4, J6, J8, J10, J12, J14, J16, J24, J26
92m2Capacitor_THT:CP_Radial_D12.5mm_P5.00mmC2, C3, C4, C5, C6, C7, C8, C9, C10
4IRF540STO_SOT_Packages_SMD:TO-263-2Q1, Q2, Q3, Q4
3Conn_01x02Connector_JST:JST_EH_S02B-EH_1x02_P2.50mm_HorizontalJ20, J21, J22
3Conn_01x03Connector_Molex:Molex_Panelmate_53780-0370_1x03_P1.25mm_HorizontalJ17, J18, J19
2100nFCapacitors_SMD:C_0402C15, C21
22.7nF50VCapacitors_SMD:C_0603C14, C20
23.3uFCapacitors_SMD:C_1210C11, C17
26.8pF100VCapacitors_SMD:C_0603C13, C19
2STPS20M100STO_SOT_Packages_SMD:TO-263-2D1, D2
2TPS54561MB_LIB:TPS54561U1, U2
11.8nF50VCapacitors_SMD:C_0402C18
110.5kResistors_SMD:R_0402R4
110V 3WDiodes_SMD:D_SMBD3
111.5kResistors_SMD:R_0402R9
1143kResistors_SMD:R_0402R2
1147Resistors_SMD:R_0402R7
1147kResistors_SMD:R_0402R3
116uHInductors_SMD:L_Wuerth_HCI-1050L1
1220RResistors_SMD:R_1206R5
136.5kResistors_SMD:R_0402R6
14.7uFCapacitor_SMD:CP_Elec_4x5.3C16
147uFCapacitor_SMD:C_1206_3216Metric_Pad1.24x1.80mm_HandSolderC22
16.5uHInductors_SMD:L_Wuerth_HCI-1050L2
160.4kResistors_SMD:R_0402R8
161.9KResistors_SMD:R_0402R1
1750pF50VCapacitors_SMD:C_0402C12

Similar boards

  • 4 layers48.3 × 20.3 mmUnified, the printed circuit board in 3D

    Unified

    ervanalb/lux

    Light control protocol

    39 parts8
  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    112 parts915
  • 4 layers52 × 52 mmMoto gps rev a1, the printed circuit board in 3D

    Moto gps rev a1

    mx3353672833-debug/moto-gps-waveshare

    MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental

    112 parts529
  • 4 layers65 × 56 mmEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    112 parts163GPL-2.0
  • 4 layers50 × 42 mmCawDrive, the printed circuit board in 3D

    CawDrive

    noxrick91/caw-drive

    三相直流无刷电机驱动器硬件

    112 parts108GPL-3.0
  • 4 layers31 × 40 mmOSS Radio 2M70CM, the printed circuit board in 3D

    OSS Radio 2M70CM

    Arkos-Engineering/HT-15_hardware

    We can split this out into separate repos later, right now its very convenient to have everything here.

    112 parts72
  • 4 layers66.7 × 37.6 mmL0destar, the printed circuit board in 3D

    L0destar

    m4rkw/l0destar

    l0destar open-source tracker project

    112 parts43
  • 4 layers35.4 × 10.8 mmThruster Controller V2, the printed circuit board in 3D

    Thruster Controller V2

    mark-belbin/motor-controller

    Custom FOC motor controller designed for underwater robotics.

    112 parts43GPL-3.0

Questions

How big is the Power board PCB?

It measures 80 × 76.7 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Power board use?

112 parts, built around the IRF540S-VB and STPS20M100SR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power board KiCad files?

From the keagoesdeep/powerBoard_PCB repository on GitHub, at the commit this page was made from: the board is power_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power board design in my own project?

Its repository states no licence, so its author keeps all rights: ask keagoesdeep before reusing the design.