

Load cell
- Size
- 151.8 × 55.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 88
- Pads
- 248
- Tracks, vias
- 395, 143
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Jul 2026
- Updated
- 28 Oct 2026
Overview
Load cell is an open-source printed circuit board by kc099, from the kc099/kicad repository on GitHub. It is a 4-layer board of 151.8 × 55.2 mm with 56 parts on 88 nets, routed with 395 tracks and 143 vias.
It is built around the STM32F103C8T6, ESP32-WROOM-32 and AMS1117-3.3, with the ABLS-8.000MHZ-B2-T among its other parts. Its parts include 26 capacitors, 12 resistors, 9 connectors, 6 ICs and 1 diode. It belongs with the sensors and measurement boards and the ESP32 and STM32 boards of this library.
Main components
4STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsABLS-8.000MHZ-B2-T
HC-49S-SMD-20℃~+70℃ 18pF 80Ω 8MHz Crystal Oscillator ±20ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9, C10, C11, C14, C15, C16, C17, C18, C19, C22, C23 |
| 10 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R7, R11, R12, R13, R14, R15 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C6, C21 |
| 3 | Conn_01x02_Pin | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J5, J6, J9 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J4, J7 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C13, C25 |
| 2 | 12p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4 |
| 2 | Conn_01x04_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J3, J8 |
| 1 | 1UF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C24 |
| 1 | ABLS-8.000MHZ-B2-T | ABLS-8.000MHZ-B2-T:XTAL_ABLS-8.000MHZ-B2-T | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | C | Fuse:Fuse_Bourns_MF-RG400 | C8 |
| 1 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C20 |
| 1 | C | Capacitor_Tantalum_SMD:CP_EIA-7132-28_AVX-C_Pad2.72x3.50mm_HandSolder | C26 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | Fuse | Fuse:Fuse_Bourns_MF-RG400 | F1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM741 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | STM32F103C8T6 | STM32F103C:QFP50P900X900X160-48N | U2 |
| 1 | ~ | LM2596:LM2596 | U5 |
| 1 | ~ | 1825910-6:hx711 | U3 |
More from kc099/kicad
12- 4 layers107.5 × 102.5 mm

- 2 layers112.7 × 110.8 mm
/8-channel_relay/8-channel_relay.kicad_pcb.jpg?size=s&soon)
- 2 layers

- 2 layers250 × 96 mm

- 4 layers199.6 × 47 mm

- 2 layers115 × 159 mm

- 2 layers102 × 95 mm

- 4 layers130.3 × 51.8 mm

- 2 layers102 × 95 mm

- 2 layers102 × 95 mm

- 4 layers122.9 × 51.8 mm

- 2 layers107.5 × 102.5 mm

Similar boards
- 4 layers67.5 × 96.5 mm

- 2 layers68 × 40 mm

Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
44 parts170CC0-1.0 - 2 layers99.1 × 58.4 mm

HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 2 layers71.3 × 25.4 mm

- 2 layers78 × 60 mm

DC Motor Controller
minhle4397/Line-Follower-Robot-v2
Improved Hardware and Firmware for Line Follower Robot
53 parts3 - 4 layers36 × 36 mm

TrackMAG
mupfdev/TrackMAG
An open hardware development board primarily intended for the development of accessible input devices.
58 parts3 - 2 layers154.7 × 113 mm

DeskMixer
RaduAndre/DeskMixer
DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.
113 parts3 - 2 layers42 × 33 mm

STM32 course
abda-s/STM32-Phill-s-Lab-PCB-Course
A beginner-friendly introduction to STM32 hardware design and KiCad
32 parts2
Questions
How big is the Load cell PCB?
It measures 151.8 × 55.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Load cell use?
56 parts, built around the STM32F103C8T6, ESP32-WROOM-32, AMS1117-3.3 and ABLS-8.000MHZ-B2-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Load cell KiCad files?
From the kc099/kicad repository on GitHub, at the commit this page was made from: the board is load_cell/load_cell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Load cell design in my own project?
Its repository states no licence, so its author keeps all rights: ask kc099 before reusing the design.