

Gbpunk
RP2040 Based Gameboy Flash Cart
- Size
- 87.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 122
- Pads
- 492
- Tracks, vias
- 1,194, 148
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Sep 2022
- Updated
- 1 Apr 2026
Overview
Gbpunk is an open-source printed circuit board by kaybarkbark, from the kaybarkbark/gbpunk repository on GitHub. It is a 2-layer board of 87.5 × 70 mm with 92 parts on 122 nets, routed with 1,194 tracks and 148 vias.
It is built around the RP2350B, W25Q128JVSIQ and SN74LVC4245APW, with the 1N4148WS and AO3401A among its other parts. Its parts include 27 capacitors, 20 resistors, 8 ICs, 7 switches and 4 connectors. It belongs with the retro computing and games boards and the RP2350 boards of this library.
Main components
5RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHSN74LVC4245APW
TSSOP-24-40℃~+85℃ 1 2.7V~3.6V 4.5V~5.5V 8 Bidirectional Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C25 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R8, R11, R13, R20 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22, C23, C24, C26, C27 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C11 |
| 4 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1, FID2, FID3, FID4 |
| 4 | MOUNT | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | SN74LVC4245A | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1, U2, U4, U5 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R7, R9, R15 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R17, R18, R19 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R10, R16 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D3 |
| 1 | 1V1_TP | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 2N7002 | PCM_Package_TO_SOT_SMD_AKL:SOT-23 | Q2 |
| 1 | 3.3uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 3V3_TP | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 500mA Hold | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | A | Button_Switch_SMD:SW_SPST_EVPBF | SW6 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | B | Button_Switch_SMD:SW_SPST_EVPBF | SW7 |
| 1 | CART | Connector_PinSocket_2.54mm:PinSocket_1x32_P2.54mm_Vertical | J4 |
| 1 | CART_TYPE_SELECT | gbpunk:SW_DPDT_CK_JS202011JCQN | SW5 |
| 1 | DOWN | Button_Switch_SMD:SW_SPST_EVPBF | SW3 |
| 1 | ERR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LOGO | gbpunk:logo | G*** |
| 1 | LOGO | gbpunk:cart | G*** |
| 1 | LOGO | gbpunk:sussy | G*** |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_EVPBF | SW1 |
| 1 | RP2350B | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U3 |
| 1 | RUN_TP | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP3 |
| 1 | SERIAL_DEBUG | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J1 |
| 1 | SSD1306 | gbpunk:SSD1306 | U7 |
| 1 | STATUS | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | SWD | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J2 |
| 1 | TRIPOD | MountingHole:MountingHole_8.4mm_M8_Pad_Via | H5 |
| 1 | UP | Button_Switch_SMD:SW_SPST_EVPBF | SW4 |
| 1 | USB | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | USB_BOOT | Button_Switch_SMD:SW_SPST_EVPBF | SW2 |
| 1 | USB_TP | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP4 |
| 1 | VBUS_TP | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U8 |
The 91 most common of 92 parts.
More from kaybarkbark/gbpunk
2- 2 layers64.5 × 95.5 mm

- 2 layers83.8 × 40.5 mm

Similar boards
- 2 layers262.5 × 107.9 mm

Econopet
DLehenbauer/econopet
Mainboard replacement for Commodore PET/CBM series machines
305 parts19CC0-1.0 - 2 layers130.4 × 76.6 mm

Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 4 layers100 × 100 mm

- 4 layers55 × 100.5 mm

OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 4 layers82.5 × 65.5 mm

- 2 layers59.1 × 60 mm

1541-rePico
fook42/1541-rePico
replacement of analog-part of Commodore 1541-Floppy devices based on Pi-Pico(2)
46 parts17GPL-3.0 - 2 layers100 × 96 mm

- 2 layers86 × 54.1 mm

Questions
How big is the Gbpunk PCB?
It measures 87.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gbpunk use?
92 parts, built around the RP2350B, W25Q128JVSIQ, SN74LVC4245APW and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gbpunk KiCad files?
From the kaybarkbark/gbpunk repository on GitHub, at the commit this page was made from: the board is hardware/gbpunk/gbpunk.kicad_pcb and its schematic hardware/gbpunk/gbpunk.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gbpunk design in my own project?
Its repository states no licence, so its author keeps all rights: ask kaybarkbark before reusing the design.