

Exposer
Exposure timer for PCB production or other analog printing techniques
- Size
- 83 × 69 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 33
- Pads
- 72
- Tracks, vias
- 101, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Apr 2024
- Updated
- 3 Dec 2025
Overview
Exposer is an open-source printed circuit board by kauzerei, from the kauzerei/exposer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83 × 69 mm with 8 parts on 33 nets, routed with 101 tracks and 0 vias.
It is built around the ULN2003A. Its parts include 2 ICs, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdExposer
Exposure timer for PCB production. Can be also used for screen printing or other analog printing techniques. Quickly knocked together using parts I had laying around.
Pictures are of a previous generation.


Parts list
TODO: write down particular parts used
- Arduino Nano
- ULN2003 or similar darlington transistor array
- TM1637 4 Digit 7-Segment LED
- 18650 cell with leads or 18650 holder
- Encoder with button
- Switch
- UV LED strip
Dependency
TM1637Display library is used for driving seven-segment display. It's the one that comes with Arduino IDE.
https://github.com/avishorp/TM1637
PCB
The board is one-sided to allow easy fabrication at home.
KiCad project is in exposer_pcb.
Neagtive artwork is in PDF format, but it's better to open the KiCad project for soldering.
Assembly
3d-print every model once, except the legs, you need four of them.
Put the LED-strips into holding pockets, solder them together and to longer power-in cable.
Fix the legs with 4mm screws or however you like.
Assemble the PCB.
Don't forget to set the correct voltage on boost converter.
Connect the LEDs to the board and you are ready to go.
Customizing
You can change the 3d-model even if you don't really know OpenSCAD language. OpenSCAD has customizer module, in which you can graphically change the parameters. You can use longer LED strips or more of them.
Usage
Rotating the encoder changes exposure in relative EV units.
Display shows time in seconds, or denominator of a fraction of a second.
It : symbol is present on display, it's fraction, if not - whole seconds.
Every step divides or multiplies the exposure time.
Pressing the encoder starts exposure and shows countdown.

Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Battery_Cell | Battery:BatteryHolder_MPD_BH-18650-PC | BT1 |
| 1 | Conn_01x02 | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J2 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SW_SPST | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW4 |
| 1 | ULN2003A | Package_DIP:DIP-16_W7.62mm_LongPads | U2 |
| 1 | ~ | chinese_modules:dc-dc module | U1 |
Similar boards
- 2 layers107 × 54 mm

- 4 layers93.3 × 60.3 mm

Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 2 layers52 × 61 mm

Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 4 layers199.9 × 69.3 mm

Zaphod controller
Scottapotamas/zaphod-bot
A DIY high performance delta-bot for fun, and lightpainting...
251 parts53 - 4 layers285.1 × 48.1 mm

Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 2 layers

- 2 layers40 × 80 mm

Splitflappcb
codingcatgirl/split-flap-fae-pcb
Alternative drop-in replacement PCB for David Kingsman's split-flap display
46 parts31Apache-2.0 - 2 layers177.9 × 187.4 mm

Audio board 0033 rev.a
palazzol/CyberamicControlCenter
Repo for docs and info about the Cyberamic Control Center
105 parts16
Questions
How big is the Exposer PCB?
It measures 83 × 69 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Exposer use?
8 parts, built around the ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Exposer KiCad files?
From the kauzerei/exposer repository on GitHub, at the commit this page was made from: the board is exposer_pcb/exposer.kicad_pcb and its schematic exposer_pcb/exposer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Exposer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).