Skip to the content
2 layers83 × 69 mmExposer, the printed circuit board in 3D

Exposure timer for PCB production or other analog printing techniques

Size
83 × 69 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
33
Pads
72
Tracks, vias
101, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Apr 2024
Updated
3 Dec 2025

Overview

Exposer is an open-source printed circuit board by kauzerei, from the kauzerei/exposer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83 × 69 mm with 8 parts on 33 nets, routed with 101 tracks and 0 vias.

It is built around the ULN2003A. Its parts include 2 ICs, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Exposer

Exposure timer for PCB production. Can be also used for screen printing or other analog printing techniques. Quickly knocked together using parts I had laying around.

Pictures are of a previous generation.

pcb side

led side

Parts list

TODO: write down particular parts used

  • Arduino Nano
  • ULN2003 or similar darlington transistor array
  • TM1637 4 Digit 7-Segment LED
  • 18650 cell with leads or 18650 holder
  • Encoder with button
  • Switch
  • UV LED strip

Dependency

TM1637Display library is used for driving seven-segment display. It's the one that comes with Arduino IDE.

https://github.com/avishorp/TM1637

PCB

The board is one-sided to allow easy fabrication at home. KiCad project is in exposer_pcb. Neagtive artwork is in PDF format, but it's better to open the KiCad project for soldering.

Assembly

3d-print every model once, except the legs, you need four of them. Put the LED-strips into holding pockets, solder them together and to longer power-in cable.
Fix the legs with 4mm screws or however you like. Assemble the PCB. Don't forget to set the correct voltage on boost converter. Connect the LEDs to the board and you are ready to go.

Customizing

You can change the 3d-model even if you don't really know OpenSCAD language. OpenSCAD has customizer module, in which you can graphically change the parameters. You can use longer LED strips or more of them.

Usage

Rotating the encoder changes exposure in relative EV units. Display shows time in seconds, or denominator of a fraction of a second. It : symbol is present on display, it's fraction, if not - whole seconds. Every step divides or multiplies the exposure time. Pressing the encoder starts exposure and shows countdown.

exposer shines light on some pcb. this picture makes no sense, to be replaced

Parts

8
QtyValueFootprintReferences
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Battery_CellBattery:BatteryHolder_MPD_BH-18650-PCBT1
1Conn_01x02Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mmJ2
1Conn_01x04_FemaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW1
1SW_SPSTButton_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2QSW4
1ULN2003APackage_DIP:DIP-16_W7.62mm_LongPadsU2
1~chinese_modules:dc-dc moduleU1

Similar boards

  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 4 layers93.3 × 60.3 mmArduino 386EX V5, the printed circuit board in 3D

    Arduino 386EX V5

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    56 parts114
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 2 layersDrehorgel20, the printed circuit board in 3D

    Drehorgel20

    bixb922/crank-organ

    MIDI based crank organ software and hardware

    14 parts47MIT
  • 2 layers40 × 80 mmSplitflappcb, the printed circuit board in 3D

    Splitflappcb

    codingcatgirl/split-flap-fae-pcb

    Alternative drop-in replacement PCB for David Kingsman's split-flap display

    46 parts31Apache-2.0
  • 2 layers177.9 × 187.4 mmAudio board 0033 rev.a, the printed circuit board in 3D

    Audio board 0033 rev.a

    palazzol/CyberamicControlCenter

    Repo for docs and info about the Cyberamic Control Center

    105 parts16

Questions

How big is the Exposer PCB?

It measures 83 × 69 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Exposer use?

8 parts, built around the ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Exposer KiCad files?

From the kauzerei/exposer repository on GitHub, at the commit this page was made from: the board is exposer_pcb/exposer.kicad_pcb and its schematic exposer_pcb/exposer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Exposer design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).