
MCU Datalogger
elCowboyLuigi/MCU_datalogger_project_study
This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

Datalogger PCB using an AVR microcontroller designed on KiCad 8.0
Datalogger PCB is an open-source printed circuit board by Kaushik093, from the Kaushik093/Datalogger-PCB repository on GitHub. It is a 2-layer board of 56.4 × 37.1 mm with 29 parts on 32 nets, routed with 289 tracks and 24 vias.
It is built around the ATMEGA328-PU and 24LC1025-I/P. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R6, R7 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 24LC1025 | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1, U2 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering | Y2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering | Y1 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U3 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DS1337S_T_R | DS1337S_T_R:SOIC127P600X175-8N | U4 |

elCowboyLuigi/MCU_datalogger_project_study
This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

cardosorapha/BASCEE
Repositório da placa de desenvolvimento ATMega customizada com EEPROM.

GuillaumeLouis13/Projet-MCU-Datalogger
Formation KiCad : projet MCU Datalogger (2 layers)


futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.

portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard

the78mole/km271-wifi
A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
It measures 56.4 × 37.1 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ATMEGA328-PU and 24LC1025-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kaushik093/Datalogger-PCB repository on GitHub, at the commit this page was made from: the board is Datalogger PCB.kicad_pcb and its schematic Datalogger PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kaushik093 before reusing the design.