
Mcuwith3subsheet
karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.
Task 7 is an open-source printed circuit board by karthikkrishnaa, from the karthikkrishnaa/Internship1_PCB_files repository on GitHub. It is a 2-layer board of 30.1 × 28.7 mm with 9 parts on 5 nets, routed with 22 tracks and 0 vias.
It is built around the LM358 and IR204-A-L. Its parts include 4 resistors, 3 diodes, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3 |
| 1 | D_Photo | Diode_THT:D_5KPW_P12.70mm_Horizontal | D3 |
| 1 | IR204A | LED_THT:LED_D3.0mm_IRBlack | D1 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | LM358 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads | U1 |
| 1 | input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.

arpandebnath56/IR-Module-PCB-Design
KiCad-based IR Module PCB design featuring circuit schematic, PCB layout, 3D visualization, and footprint integration.

Heman-hk/IR-Sensor-PCB-Design
This project implements a simple Infrared (IR) proximity sensor using an IR LED, photodiode, and an LM358 operational amplifier configured as a voltage comparator.


Sahilhamids/IR-sensor-module
Designed a two layer PCB of IR sensor module andVoltage regulator using the open source EDA KiCADsoftware.



Raunak5/electronics-designs
A collection of analog, digital and PCB design projects created using KiCad.
It measures 30.1 × 28.7 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358 and IR204-A-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the karthikkrishnaa/Internship1_PCB_files repository on GitHub, at the commit this page was made from: the board is 10-02-2026/task 7/task 7.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask karthikkrishnaa before reusing the design.