
Ir project
hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.

IR Sensor circuit and PCB designed using KiCad.
IR SENSOR is an open-source printed circuit board by yatharthpats23, from the yatharthpats23/IR-Sensor-PCB-Design repository on GitHub. It is a 2-layer board of 29.5 × 17 mm with 9 parts on 7 nets, routed with 60 tracks and 3 vias.
It is built around the LM358 and IR204-A-L. Its parts include 3 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
This project is an IR Sensor PCB designed using KiCad. The project includes schematic capture, PCB layout, and routing.
Yatharth Pathak
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | D_Photo | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | IR204A | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | LM358 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm_ThermalVias | U1 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_3214G_Horizontal | RV1 |

hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.

arpandebnath56/IR-Module-PCB-Design
KiCad-based IR Module PCB design featuring circuit schematic, PCB layout, 3D visualization, and footprint integration.

Heman-hk/IR-Sensor-PCB-Design
This project implements a simple Infrared (IR) proximity sensor using an IR LED, photodiode, and an LM358 operational amplifier configured as a voltage comparator.


Sahilhamids/IR-sensor-module
Designed a two layer PCB of IR sensor module andVoltage regulator using the open source EDA KiCADsoftware.


karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

Raunak5/electronics-designs
A collection of analog, digital and PCB design projects created using KiCad.
It measures 29.5 × 17 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358 and IR204-A-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yatharthpats23/IR-Sensor-PCB-Design repository on GitHub, at the commit this page was made from: the board is IR SENSOR.kicad_pcb and its schematic IR SENSOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yatharthpats23 before reusing the design.