
Mcuwith3subsheet
karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.
Task 8 is an open-source printed circuit board by karthikkrishnaa, from the karthikkrishnaa/Internship1_PCB_files repository on GitHub. It is a 2-layer board of 35.1 × 31.8 mm with 9 parts on 8 nets, routed with 31 tracks and 0 vias.
It is built around the LM358 and BC547. Its parts include 4 resistors, 1 IC, 1 diode, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 560 OHM | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | LDR03 | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM358 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads | U1 |
| 1 | pot | Potentiometer_THT:Potentiometer_ACP_CA14-H2,5_Horizontal | RV1 |
| 1 | supply | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

EchelonForce/vclfo10
A Eurorack LFO design based on the Electric Druid VCLFO10 chip.



fledsbo/Modules
Eurorack module designs using KiCad — VCO, VCF, VCA, ADSR, and Daisy Seed


erdemcanaz/EE313-Term-project
Semanur and I are university students at METU EE, and we are lab partners at an analog laboratory course abbreviated as EE313. In this course, we do predetermined experiments on analog circuits (mainly amplifiers).

It measures 35.1 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM358 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the karthikkrishnaa/Internship1_PCB_files repository on GitHub, at the commit this page was made from: the board is task 8/task 8.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask karthikkrishnaa before reusing the design.