
Mcuwith3subsheet
karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.
Buzzercircuit is an open-source printed circuit board by karthikkrishnaa, from the karthikkrishnaa/Internship1_PCB_files repository on GitHub. It is a 2-layer board of 49 × 22 mm with 12 parts on 10 nets, routed with 42 tracks and 0 vias.
It is built around the NE555P. Its parts include 3 resistors, 2 capacitors, 2 ICs, 1 diode and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | NE555P | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 1000uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3266W_Vertical | RV1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 1uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 9v | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | BT1 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1 |

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 49 × 22 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the karthikkrishnaa/Internship1_PCB_files repository on GitHub, at the commit this page was made from: the board is led driver 2 layer/firealaram/mini_amp/buzzercircuit/buzzercircuit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask karthikkrishnaa before reusing the design.