Skip to the content
2 layers45 × 31 mmSTM32Project, the printed circuit board in 3D
Size
45 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
47
Pads
130
Tracks, vias
237, 26
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Feb 2024
Updated
29 Feb 2024

Overview

STM32Project is an open-source printed circuit board by karry3775, from the karry3775/STM32BreakoutBoard repository on GitHub. It is a 2-layer board of 45 × 31 mm with 29 parts on 47 nets, routed with 237 tracks and 26 vias.

It is built around the STM32F103C8T6 and AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 2 ICs, 1 diode and 1 switch. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

STM32BreakoutBoard

Parts

29
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C9
41k5Resistor_SMD:R_0402_1005MetricR2, R3, R4, R5
3Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalI2C, SWD, USART
210pCapacitor_SMD:C_0402_1005MetricC10, C11
21uCapacitor_SMD:C_0603_1608MetricC7, C8
222uCapacitor_SMD:C_0805_2012MetricC12, C13
110kResistor_SMD:R_0201_0603MetricR1
110nCapacitor_SMD:C_0402_1005MetricC6
110uCapacitor_SMD:C_0603_1608MetricC5
1120RInductor_SMD:L_0603_1608MetricFB1
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1LOGOkartik:custom_logoG***
1REDLED_SMD:LED_0603_1608MetricD1
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1USB_B_MicroConnector_USB:USB_Micro-B_Wuerth_629105150521USB

Similar boards

  • 2 layers68 × 40 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    44 parts170CC0-1.0
  • 2 layers99.1 × 58.4 mmHEAT, the printed circuit board in 3D

    HEAT

    milar111/HEAT

    An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.

    57 parts9
  • 2 layers71.3 × 25.4 mmUSB DALI, the printed circuit board in 3D

    USB DALI

    even-notodd/USB-DALI

    USB-DALI interface converter

    43 parts4
  • 2 layers78 × 60 mmDC Motor Controller, the printed circuit board in 3D

    DC Motor Controller

    minhle4397/Line-Follower-Robot-v2

    Improved Hardware and Firmware for Line Follower Robot

    53 parts3
  • 4 layers36 × 36 mmTrackMAG, the printed circuit board in 3D

    TrackMAG

    mupfdev/TrackMAG

    An open hardware development board primarily intended for the development of accessible input devices.

    58 parts3
  • 2 layers154.7 × 113 mmDeskMixer, the printed circuit board in 3D

    DeskMixer

    RaduAndre/DeskMixer

    DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.

    113 parts3
  • 2 layers42 × 33 mmSTM32 course, the printed circuit board in 3D

    STM32 course

    abda-s/STM32-Phill-s-Lab-PCB-Course

    A beginner-friendly introduction to STM32 hardware design and KiCad

    32 parts2
  • 2 layers53.3 × 35.6 mmStm32 minimal dev, the printed circuit board in 3D

    Stm32 minimal dev

    amrithHN/stm32_minimal_dev

    stm32 based minimal dev board

    33 parts2GPL-3.0

Questions

How big is the STM32Project PCB?

It measures 45 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STM32Project use?

29 parts, built around the STM32F103C8T6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32Project KiCad files?

From the karry3775/STM32BreakoutBoard repository on GitHub, at the commit this page was made from: the board is STM32Project.kicad_pcb and its schematic STM32Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32Project design in my own project?

Its repository states no licence, so its author keeps all rights: ask karry3775 before reusing the design.