Skip to the content
2 layers48 × 58.5 mmADS1248, the printed circuit board in 3D

Some templates that are very useful for developing PCBs in KiCad

Size
48 × 58.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
38
Pads
106
Tracks, vias
40, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Nov 2023
Updated
7 Mar 2024

Overview

ADS1248 is an open-source printed circuit board by karistonf, from the karistonf/template_kicad repository on GitHub. It is a 2-layer board of 48 × 58.5 mm with 37 parts on 38 nets, routed with 40 tracks and 0 vias.

README

README.md

Template Kicad

Some templates that are very useful for developing PCBs in KiCad

The components in the template include:

  • A symmetrical power supply with an input of 5 volts and outputs of +12 volts and -12 volts.
  • Can (Controller Area Network) module
  • A buck power supply with an input of 12 volts and an output of 3.3 volts.
  • A microcontroller, the STM32F103, featuring a High-speed external (HSE) crystal, a Low-speed external (LSE) crystal for the RTC, a 3.3V battery backup for the RTC, power indicator LEDs, a USB connector, and a programming connector with a JST jack.

Parts

37
QtyValueFootprintReferences
140.1uFCapacitor_SMD:C_0603_1608MetricAds_ain_C1, Ads_ain_C2, Ads_ain_C3, Ads_ain_C4, Ads_ain_C5, Ads_ain_C6, Ads_C1, Ads_C2, Ads_C3, Ads_ref_0_C1, Ads_ref_0_C2, Ads_ref_0_C3, Ads_ref_1_C1, Ads_ref_1_C2
747Resistor_SMD:R_0402_1005MetricAds_R1, Ads_R2, Ads_R3, Ads_R4, Ads_R5, Ads_R6, Ads_R7
7Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP_-1, JP_+1, JP_ain0, JP_gnd1, JP_IEXC1, JP_ref_5, JP_ref_refp1
3CCapacitor_SMD:C_0603_1608MetricCRTD_I_CM5, CRTD_I_CM6, CRTD_I_DIFF3
21uFCapacitor_SMD:C_0603_1608MetricRef_C1, Ref_C3
110KResistor_SMD:R_0603_1608MetricREF1
122uFCapacitor_SMD:C_0603_1608MetricRef_C2
1ADS1248IPWRADS1248:SOP65P640X120-28NAds_IC1
1REF5050ADPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

More from karistonf/template_kicad

7
  • 2 layersFonte simetrica -12V +12V, the printed circuit board in 3D

    Fonte simetrica -12V +12V

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    23 parts1
  • 2 layersStm32 crystal, the printed circuit board in 3D

    Stm32 crystal

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    21 parts1
  • 2 layersAds1115, the printed circuit board in 3D

    Ads1115

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    11 parts1
  • 2 layersInstrumentation Amplifier, the printed circuit board in 3D

    Instrumentation Amplifier

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    9 parts1
  • 2 layers15.7 × 12.6 mmCan, the printed circuit board in 3D

    Can

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    8 parts1
  • 2 layersFonte buck 3V3, the printed circuit board in 3D

    Fonte buck 3V3

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    6 parts1
  • 2 layersPower supply buck 5v, the printed circuit board in 3D

    Power supply buck 5v

    karistonf/template_kicad

    Some templates that are very useful for developing PCBs in KiCad

    5 parts1

Similar boards

  • 2 layers40 × 34 mmDD HIP9011, the printed circuit board in 3D

    DD HIP9011

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    37 parts1.2k
  • 2 layers53.9 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    37 parts1kGPL-3.0
  • 2 layers52 × 51.8 mmEsp32-homeassistant rf bridge, the printed circuit board in 3D

    Esp32-homeassistant rf bridge

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    37 parts915
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers65 × 28 mmBMS Cell Module, the printed circuit board in 3D

    BMS Cell Module

    stuartpittaway/diyBMS

    Do it yourself battery management system for Lithium ion battery packs/cells

    37 parts676GPL-3.0
  • 2 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    37 parts575GPL-2.0
  • 2 layers38.1 × 153.7 mmDEFOG PANEL, the printed circuit board in 3D

    DEFOG PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    37 parts431
  • 2 layers47.8 × 27.4 mmVsf stm32h7b0, the printed circuit board in 3D

    Vsf stm32h7b0

    vsfteam/vsf

    Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems

    37 parts341Apache-2.0

Questions

How big is the ADS1248 PCB?

It measures 48 × 58.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ADS1248 use?

37 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ADS1248 KiCad files?

From the karistonf/template_kicad repository on GitHub, at the commit this page was made from: the board is ADS1248/ADS1248/ADS1248.kicad_pcb and its schematic ADS1248/ADS1248/ADS1248.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ADS1248 design in my own project?

Its repository states no licence, so its author keeps all rights: ask karistonf before reusing the design.