
Iot device pcb
ODARI-CHARLES1/iot_device_pcb
Hardware design for a air conditioner pcb design using Kicad software. This is for learning purpose only not manufacturable.

An electronic metronome
Metronome is an open-source printed circuit board by karhincheong, from the karhincheong/Metronome repository on GitHub. It is a 4-layer board of 158.8 × 73.8 mm with 46 parts on 73 nets, routed with 404 tracks and 70 vias.
It is built around the ESP32-S3-WROOM-1-N8, MCP73871EV and AMS1117-3.3, with the USBLC6-2SC6 and HS180S10B among its other parts. Its parts include 13 resistors, 7 switches, 6 capacitors, 5 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
An electronic metronome powered by an ESP32-S3-WROOM Module, utilising a 160 x 128 LCD-TFT screen and a speaker
I find my phone too distracting when attending music class, hence I'm making this metronome on a separate device so that its simple and non-distracting
| Item | Description | Price |
|---|---|---|
| PCB Printing | JLCPCB | 2.00 |
| Shipping | UPS Express Saver | 9.24 |
| Folder | Description |
|---|---|
kicad/ | KiCAD files |
3d/ | 3D files for the case and the PCB |
src/ | Source Code for firmware |
production/ | Files for manufacturers |
src/main onto the PCB by connecting your computer to the USB-C on the PCB. You may also have to press down on BOOT and RESET for it to enter serial download mode
For clearer version, please refer schematics.pdf, or maybe you're trying to attract bugs ...


You may refer to 3d/pcb3d.step but note that there will not be any silkscreen or solder mask on it

Refer to 3d/metronomecase.step or 3d/metronomecase.f3d if you use Autodesk Fusion

Uncompressed version at zine.pdf
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R11, R14, R16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 3 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 3 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW4 |
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8 |
| 2 | 2 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | 4.7 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 5.1 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 15 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 22 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 330 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | BOOT | easyeda2kicad.pretty:SW-SMD_4P-L4.5-W4.5-P3.00-LS7.0_TS-1009S-03826 | SW8 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | HS180S10B | easyeda2kicad.pretty:LCD-TH_L56.0-W35.0-P2.54_HS180S10B | LCD1 |
| 1 | JST Connector | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | NTC 10k | easyeda2kicad.pretty:R0805 | TH1 |
| 1 | PWR_BTN | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW7 |
| 1 | Play/Pause | easyeda2kicad.pretty:CONN-TH_PB-05B-R | SW3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | RESET | easyeda2kicad.pretty:SW-SMD_4P-L4.5-W4.5-P3.00-LS7.0_TS-1009S-03826 | SW6 |
| 1 | Speaker | easyeda2kicad.pretty:SPK-TH_BD23.0-P10.00-D0.8-L-RD | LS1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
The 45 most common of 46 parts.

ODARI-CHARLES1/iot_device_pcb
Hardware design for a air conditioner pcb design using Kicad software. This is for learning purpose only not manufacturable.

TaniWanKenobi/the-time-machine
Table of Contents About The Project Built With PCB Design Wiring BOM Contact


kunikuzushii/Catboy-vs.-Puppyboy-inator
A device that use a camera, machine learning, and hopes and dreams to detect if the registered faces are more likely to be a catboy or a puppyboy :D

andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.

bkuhn4/e-ink-picture-frame
To make it easy for you to get started with GitLab, here's a list of recommended next steps.

RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand

romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
It measures 158.8 × 73.8 mm and has 4 copper layers, 1.6 mm thick.
46 parts, built around the ESP32-S3-WROOM-1-N8, MCP73871EV, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the karhincheong/Metronome repository on GitHub, at the commit this page was made from: the board is kicad/Metronome.kicad_pcb and its schematic kicad/Metronome.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask karhincheong before reusing the design.