2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0
2 layers58 × 32.5 mm
Eink pcb
Kandles11/eink-pcb- Size
- 58 × 32.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 70
- Pads
- 193
- Tracks, vias
- 332, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Jul 2026
- Updated
- 28 Jul 2026
Overview
Eink pcb is an open-source printed circuit board by Kandles11, from the Kandles11/eink-pcb repository on GitHub. It is a 2-layer board of 58 × 32.5 mm with 49 parts on 70 nets, routed with 332 tracks and 31 vias.
It is built around the ESP32-S3-WROOM-1-N4, 05A20L24P and MBR0530. Its parts include 19 capacitors, 14 resistors, 6 diodes, 3 ICs and 3 connectors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N4
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
05A20L24P
SMD,P=0.5mm-25℃~+85℃ 0.3mm 0.5mm 24P 2mm 400mA 50V Bottom Contact Hinged Lid Phosphor bronze Surface Mount, Right Angle Tin SMD,P=0.5mm FFC, FPC (Flat Flexible) Connector Assemblies ROHSHanElectricityFFC, FPC (Flat Flexible) Connector Assemblies
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdeink-pcb
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7uF | PCM_JLCPCB:C_0805 | C1, C2, C3, C4, C5, C9, C10, C11 |
| 4 | 10uF | PCM_JLCPCB:C_0603 | C13, C14, C17, C18 |
| 4 | 1uF | PCM_JLCPCB:C_0603 | C6, C7, C8, C12 |
| 3 | 5.1kΩ | PCM_JLCPCB:R_0603 | R1, R4, R6 |
| 3 | MBR0530 | JLCImport:MBR0530 | D1, D2, D3 |
| 2 | 100nF | PCM_JLCPCB:C_0402 | C16, C19 |
| 2 | 10kΩ | PCM_JLCPCB:R_0603 | R5, R10 |
| 2 | 1Ω | PCM_JLCPCB:R_0603 | R2B1, R4B1 |
| 2 | 22Ω | PCM_JLCPCB:R_0603 | R2, R3 |
| 2 | 2Ω | PCM_JLCPCB:R_0603 | R2A1, R4A1 |
| 2 | 33Ω | PCM_JLCPCB:R_0805 | R7, R8 |
| 2 | B2B-XH-A_LF_SN | JLCImport:B2B-XH-A_LF_SN | CN1, CN2 |
| 2 | Tactile Button, 160gf | PCM_JLCPCB:SW_TS-1088-AR02016 | S1, S2 |
| 1 | 05A20L24P | JLCImport:FFC05001-24SBA124W5M | U2 |
| 1 | 10uH/1A | JLCImport:CY43-10UH | L1 |
| 1 | 150Ω | PCM_JLCPCB:R_0805 | R9 |
| 1 | 22uF | PCM_JLCPCB:C_0603 | C15 |
| 1 | BLUE LED | JLCImport:FC-A2012BK-470H2 | LED3 |
| 1 | Connector, USB-TYPE-C-16P | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 1 | ESP32-S3-WROOM-1-N4 | JLCImport:ESP32-S3-WROOM-1-N4 | U1 |
| 1 | GREEN LED | JLCImport:FC-A2012BK-470H2 | LED2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RED LED | JLCImport:FC-2012HRK-620D | LED1 |
| 1 | SI1308EDL_C7603347 | JLCImport:SI1308EDL_C7603347 | Q1 |
Questions
How big is the Eink pcb PCB?
It measures 58 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eink pcb use?
49 parts, built around the ESP32-S3-WROOM-1-N4, 05A20L24P and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eink pcb KiCad files?
From the Kandles11/eink-pcb repository on GitHub, at the commit this page was made from: the board is eink-pcb.kicad_pcb and its schematic eink-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eink pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kandles11 before reusing the design.
Similar boards
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 2 layers58.5 × 88 mm
Fugu2
fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources
147 parts24 - 2 layers120 × 80 mm
Spikeling v3.2
OpenSourceNeuro/Spikeling
A hardware implementation of spiking neurons for neuroscience teaching and outreach
233 parts21GPL-3.0 - 4 layers267 × 75 mm
Fracture
SharKingStudios/Fracture
An infinitely expandable, velocity sensing split midi keyboard.
208 parts10MIT - 4 layers41 × 149 mm
Air filter controller
ademuri/air-filter-controller
The ESP32-S3 uses 3.3V. I want onboard indicator LEDs, and the option to have offboard LEDs as well. Using addressable WS2812-type LEDs is flexible. These need a 5V supply.
167 parts1 - 2 layers100 × 100 mm
Splitflap
besi/split-flap-clock
Split Flap clock or calendar utilising four 28BYJ-48 stepper motors.
91 parts1 - 2 layers70 × 59 mm
DinoSpand v2.0
gabriele-moretto/dinospand
Agricultural PCB project design and firmware developing.
89 parts1