Skip to the content
2 layers42 × 40 mmWifi node, the printed circuit board in 3D
Size
42 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
37
Pads
142
Tracks, vias
155, 226
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Oct 2022
Updated
26 Feb 2026

Overview

Wifi node is an open-source printed circuit board by kaga1minn0nnn4, from the kaga1minn0nnn4/wifi_node_pcb repository on GitHub. It is a 2-layer board of 42 × 40 mm with 42 parts on 37 nets, routed with 155 tracks and 226 vias.

It is built around the CH340E, ESP-WROOM-02 and NJM7805FA. Its parts include 12 resistors, 8 capacitors, 6 diodes, 5 connectors and 4 ICs. It belongs with the radio and wireless boards of this library.

Main components

3

README

README.md

概要

高専4年の授業で作ったスイッチボットのPCBデータ

Parts

42
QtyValueFootprintReferences
510kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R7, R11, R12
54.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4, R8, R9, R10
5CCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C4, C5, C8
5LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2, D3, D4, D5, D6
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3Conn_01x03Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ3, J5, J6
20.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6, C7
2100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6
2SW_MEC_5Gmy_sw:my_swSW1, SW2
1AZ1117H-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_Wuerth_6941xx301002J1
1CH340EPackage_SO:MSOP-10_3x3mm_P0.5mmU3
1C_PolarizedCapacitor_SMD:CP_Elec_10x12.5C1
1DDiode_SMD:D_SMAD1
1ESP-WROOM-02RF_Module:ESP-WROOM-02U4
1FuseFuse:Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_HorizontalF1
1NJM7805Package_TO_SOT_SMD:TO-252-2U1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J2

Similar boards

  • 2 layers119.4 × 78.7 mmEleMagDriver, the printed circuit board in 3D

    EleMagDriver

    DenKen-NITNC/EleMagHarmony

    Band Instrument (Part) : - Stepping Motor (Melody) - Solenoid (Guitar) - Floppy Disc Drive (Base) - Relay (Drum)

    49 parts3
  • 2 layers55 × 90 mmEsp32s3 http, the printed circuit board in 3D

    Esp32s3 http

    sanbungi/potato-esp32

    46 parts
  • 4 layers180 × 81.3 mmSystemController, the printed circuit board in 3D

    SystemController

    46nori/FMSynthEnsemble

    USB MIDI FM synthesizer that supports voice synthesis using CSM (Composite Sinusoidal Model

    67 partsMIT
  • 2 layers95 × 72 mmSyamei0 MD, the printed circuit board in 3D

    Syamei0 MD

    syamei0/Y.maku

    左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

    132 parts
  • 2 layers13.7 × 21.4 mmZ2m partner, the printed circuit board in 3D

    Z2m partner

    smarthomefans/z2m_partner

    Hardware module for iobroker.zigbee

    52 parts186
  • 2 layers41.3 × 87.1 mmUnified smd pcb, the printed circuit board in 3D

    Unified smd pcb

    Al-Nafuur/United-Carts-of-Atari

    Firmware for PlusCart and UnoCart

    22 parts45GPL-3.0
  • 4 layers77.6 × 57.3 mmWifistepper, the printed circuit board in 3D

    Wifistepper

    goodrobotics/wifistepper

    Wi-Fi Stepper project repo

    92 parts29
  • 2 layers72.5 × 17 mmLight timer, the printed circuit board in 3D

    Light timer

    mulcmu/esphome-usb-grow-lights

    Custom PCB and esphome configuration for usb powered grow lights.

    41 parts21MIT

Questions

How big is the Wifi node PCB?

It measures 42 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Wifi node use?

42 parts, built around the CH340E, ESP-WROOM-02 and NJM7805FA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Wifi node KiCad files?

From the kaga1minn0nnn4/wifi_node_pcb repository on GitHub, at the commit this page was made from: the board is wifi_node.kicad_pcb and its schematic wifi_node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Wifi node design in my own project?

Its repository states no licence, so its author keeps all rights: ask kaga1minn0nnn4 before reusing the design.