Skip to the content
2 layers26.5 × 49.9 mmEsc, the printed circuit board in 3D

A minimal fixed wing drone project

Size
26.5 × 49.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
15
Pads
63
Tracks, vias
79, 32
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Jul 2025
Updated
18 Jul 2025

Overview

Esc is an open-source printed circuit board by k-off, from the k-off/fixed_wing_uav repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 26.5 × 49.9 mm with 22 parts on 15 nets, routed with 79 tracks and 32 vias.

It is built around the SI2300. Its parts include 8 resistors, 5 capacitors and 4 transistors. It belongs with the robots and motor control boards and the RP2350 boards of this library.

Main components

1

README

esc/esc_array/readme.md

JLCPCB manufactures boards of size of up to 100x100mm for the same price.

The esc board is much smaller, so it is possible to combine multiple pcb-s in an array on a single panel.

So here's an array of 6 esc-s.

Parts

22
QtyValueFootprintReferences
4100uFCapacitor_THT:CP_Radial_D10.0mm_P3.50mmC1, C2, C13, C14
4470RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R7, R8
45.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4
4SI2300Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
122uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
1GNDConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical3.3V1
1HT75xx-1-SOT89Package_TO_SOT_SMD:SOT-89-3HT7533
1batt_inConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Verticalbatt_in1
1controlConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Verticalcontrol_in1
1load-Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Verticalload+1

More from k-off/fixed_wing_uav

1
  • 2 layers83.5 × 99.9 mmEsc array, the printed circuit board in 3D

    Esc array

    k-off/fixed_wing_uav

    A minimal fixed wing drone project

    352 partsApache-2.0

Similar boards

  • 2 layers87 × 71 mmSocket, the printed circuit board in 3D

    Socket

    eddyem/STM8_samples

    Some code samples and ready projects based on STM8 (deprecated)

    89 parts80
  • 2 layers89.3 × 52.1 mmDivergence Meter Project v2, the printed circuit board in 3D

    Divergence Meter Project v2

    waicool20/Divergence-Meter-Project-v2

    This is the second iteration of the Divergence Meter Project and another personal learning project, this time learning how to integrate Li-Ion batteries into a project, new electrical converter topologies, Rust…

    149 parts28
  • 2 layers188.5 × 88.9 mmEsp gamepad v2, the printed circuit board in 3D

    Esp gamepad v2

    Reiko0908/NeuralNetwork_Based_AutonomousCar

    This project focuses on developing an autonomous car system powered by neural networks (NN). It utilizes deep learning techniques to enable key functionalities such as perception, path planning, and control.

    70 parts2Apache-2.0
  • 2 layers72.6 × 30.6 mmEsp20A80V, the printed circuit board in 3D

    Esp20A80V

    RoboDurden/Esp32_20A_80V_dcdc

    20A 80V dcdc/mppt with Esp32 and touch display

    31 parts2MIT
  • 2 layers100 × 100 mmSmart air, the printed circuit board in 3D

    Smart air

    meeTeam05/smart-air

    Devices provision over BLE, publish telemetry/shadow over MQTT, and serve the app through a Cloudflare-fronted Fastify API. See Features below for the full breakdown.

    70 parts1MIT
  • 2 layers25.8 × 24.3 mm4in1 ESC, the printed circuit board in 3D

    4in1 ESC

    PrashantHalai-212/4in1_Brushed_Motor_ESC

    4-in-1 Brushed DC Motor ESC for Drones. A compact electronic speed controller designed to drive four brushed DC motors simultaneously.

    35 parts1MIT
  • 4 layers80 × 140 mmIOB V3, the printed circuit board in 3D

    IOB V3

    SpaceTeam/Lamarr_IOB_V3

    280 parts1
  • 2 layers29.8 × 56.2 mmDrone, the printed circuit board in 3D

    Drone

    bottlecoder-raj/FPV-DRONE

    Personal drone project FPV

    22 parts

Questions

How big is the Esc PCB?

It measures 26.5 × 49.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esc use?

22 parts, built around the SI2300. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esc KiCad files?

From the k-off/fixed_wing_uav repository on GitHub, at the commit this page was made from: the board is esc/esc.kicad_pcb and its schematic esc/esc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esc design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).