Skip to the content
2 layers80 × 80 mmAres v1 BaseBoard, the printed circuit board in 3D

Ares v1 BaseBoard

jzimme14/Ares

Flight Controller for autonomous drone.

Size
80 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
34
Pads
117
Tracks, vias
198, 635
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 May 2024
Updated
5 Apr 2025

Overview

Ares v1 BaseBoard is an open-source printed circuit board by jzimme14, from the jzimme14/Ares repository on GitHub. It is a 2-layer board of 80 × 80 mm with 44 parts on 34 nets, routed with 198 tracks and 635 vias.

It is built around the ABX00027 and XT60-M. Its parts include 15 connectors, 8 resistors, 7 capacitors, 2 diodes and 1 IC. It belongs with the robots and motor control and computers and single-board computers boards of this library.

Main components

2

README

README.md

Ares

Flight Controller for autonomous drone.

Parts

44
QtyValueFootprintReferences
31000uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C3, C4
3100nCapacitor_SMD:C_0603_1608MetricC5, C6, C7
3330kResistor_SMD:R_0805_2012MetricR4, R6, R8
3LOGOLOGOG***, G***, G***
2B4B-XH-AM__LF__SN_Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_VerticalJ1, J2
10Resistor_SMD:R_0805_2012MetricR2
1100nStiftleisteOnPCB:cap_tht_ceramicC2
1220Resistor_SMD:R_0805_2012MetricR1
122kResistor_SMD:R_0805_2012MetricR7
133kResistor_SMD:R_0805_2012MetricR5
147kResistor_SMD:R_0805_2012MetricR3
1ABX00027parts:ArduinoNano33IOT_StiftleisteU1
1I2C_ConnStiftleisteOnPCB:PowerKlemmeJ27
1LED/BlauStiftleisteOnPCB:PowerKlemmeD2
1LED/RotStiftleisteOnPCB:PowerKlemmeD1
1Motor Power Connector 1StiftleisteOnPCB:PowerKlemmeJ20
1Motor Power Connector 2StiftleisteOnPCB:PowerKlemmeJ13
1Motor Power Connector 3StiftleisteOnPCB:PowerKlemmeJ21
1Motor Power Connector 4StiftleisteOnPCB:PowerKlemmeJ14
1PWM Connector 1StiftleisteOnPCB:Stiftleiste3PinJ4
1PWM Connector 2StiftleisteOnPCB:Stiftleiste3PinJ5
1PWM Connector 3StiftleisteOnPCB:Stiftleiste3PinJ12
1PWM Connector 4StiftleisteOnPCB:Stiftleiste3PinJ10
1PWM1/D10StiftleisteOnPCB:Stiftleiste3PinJ3
1PWM2/D16StiftleisteOnPCB:Stiftleiste3PinJ22
1PWM3/D17StiftleisteOnPCB:Stiftleiste3PinJ23
1XT60-Mparts:AMASS_XT60-MJ15

The 36 most common of 44 parts.

More from jzimme14/Ares

2
  • 2 layers40 × 40 mmAres FC, the printed circuit board in 3D

    Ares FC

    jzimme14/Ares

    Flight Controller for autonomous drone.

    2 parts

Similar boards

  • 4 layers53.2 × 53.2 mmSmart lcc, the printed circuit board in 3D

    Smart lcc

    magnusnordlander/smart-lcc

    A smarter LCC for the Lelit Bianca V2, with Wi-Fi and stuff.

    38 parts54
  • 2 layers158.8 × 120.6 mmMini keyboard, the printed circuit board in 3D

    Mini keyboard

    hdlguy/kicad

    Miscellaneous KiCad work

    87 parts3MIT
  • 2 layers85 × 55 mmLogheat, the printed circuit board in 3D

    Logheat

    Dran3m/logheat_kicad

    21 parts
  • 4 layers97.6 × 108.3 mmProjet Velux, the printed circuit board in 3D

    Projet Velux

    louisonmalinge/Projet-Velux

    Dans ce Git, vous trouverez les fichiers ayant permis de réaliser le projet Velux, avec ses différentes versions.

    27 parts
  • 2 layers48.5 × 26 mmEdgeMeter, the printed circuit board in 3D

    EdgeMeter

    measurify/example-soccer

    This thesis project aims to develop a complete system for collecting and data classification in the sport of football, specifically for autonomous recognition of shooting, passing and stopping.

    23 parts
  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 2 layers120 × 100 mmRoot, the printed circuit board in 3D

    Root

    GonzaCerv/noah-hardware

    This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

    127 parts28MIT
  • 2 layers110 × 110 mmMs pcb, the printed circuit board in 3D

    Ms pcb

    opatiny/micromouse

    Designing a custom micromouse robot.

    39 parts15CERN-OHL-P-2.0

Questions

How big is the Ares v1 BaseBoard PCB?

It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ares v1 BaseBoard use?

44 parts, built around the ABX00027 and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ares v1 BaseBoard KiCad files?

From the jzimme14/Ares repository on GitHub, at the commit this page was made from: the board is Ares_v1/Ares_v1_BaseBoard/Ares_v1_BaseBoard.kicad_pcb and its schematic Ares_ESC/Ares_ESC_v1/Ares_ESC_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ares v1 BaseBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask jzimme14 before reusing the design.