4 layers45.5 × 52 mm
4 layers45.5 × 52 mm
Eeg
jwmke/eeg7Open Source 8-channel EEG Pi Pico Shield for <$80
- Size
- 45.5 × 52 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 89
- Pads
- 308
- Tracks, vias
- 707, 87
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jul 2024
- Updated
- 24 Jan 2025
Overview
Eeg is an open-source printed circuit board by jwmke, from the jwmke/eeg repository on GitHub. It is a 4-layer board of 45.5 × 52 mm with 73 parts on 89 nets, routed with 707 tracks and 87 vias.
It is built around the ADS1299IPAGR, TPD4E1B06DCKR-TP and LM2664M6, with the TPS73225DBVR-TP and CAY16-103J4LF among its other parts. Its parts include 44 capacitors, 10 resistors, 9 ICs, 4 connectors and 1 inductor.
Main components
5
ADS1299IPAGR
TQFP-64(10x10)-40℃~+85℃ 1.5MHz~2.25MHz、2.048MHz 1.8V~3.6V、4.75V~5.25V 121dB 24 4.5V 8 Programmable gain、Multiplexers、Internal reference source、Fault detection、Built-in temperature sensor、Simultaneous sampling control SPI TQFP-64(10x10) Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)
TPD4E1B06DCKR-TP
SOT-3630.6pF 14.5V 5.5V 9.5V 900pA Bidirectional ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-363 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
LM2664M6
SOT-23-6-40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 40mA 500uA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge Pumps
TPS73225DBVR-TP
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorised
CAY16-103J4LF
0603x410kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
README
README.mdOpen-Source Affordable EEG PCB
An 8-channel EEG Pi Pico W shield, based off of OpenBCI's Cyton Biosensing Board, for 1/10th the price.
The heart of this PCB is a Texas Instrument's ADS1299, a low noise, 8-Channel, Analog-to-Digital Converter.
Instructions
- Update your SSID and PASSWORD in the pico/main.py file
- Upload the main.py to the Pi Pico W
- Run the pico/main.py on the Pico Pi W and note the printed IP
- Unplug the Pi Pico W from the PC and place it into the PCB
- Update the PICO_IP in the computer/plot_data.py file
- Run the computer/plot_data.py on a PC
- Plug a 3.7V Lipo battery into the PCB
- Blinking LED == Connecting, Solid LED == Succesfully streaming to PC
Schematics
Layout
Top
Bottom
Ground
AVSS/-2.5V
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25, C26, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44 +1 |
| 9 | 1µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C9, C10, C12, C14, C17, C27, C29 |
| 7 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R6, R7, R8, R9, R10 |
| 6 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C6, C8, C11, C15, C16 |
| 4 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C18, C19, C22 |
| 4 | CAY16-103J4LF | CustomLib:CAT16A203J4LF | RN5, RN6, RN7, RN8 |
| 3 | 0.01µF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C23, C28, C30 |
| 3 | 22µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C20, C21, C24 |
| 3 | TPD4E1B06DCKR | CustomLib:tpd4e1b06dckr | U3, U4, U9 |
| 2 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J3, J4 |
| 1 | 1.5nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 100kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 100µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C13 |
| 1 | 1MΩ | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 1µH | CustomLib:IND_74438357010_WRE | L1 |
| 1 | 732kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ADS1299IPAGR | CustomLib:PAG64_TEX | U1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | LM2664M6 | CustomLib:lm266 | U5 |
| 1 | LOGO | CustomLib:brain2 | G*** |
| 1 | TPS61023DRLR | CustomLib:SOTFL50P160X60-6N | U6 |
| 1 | TPS72325DBVT | CustomLib:72325 | U8 |
| 1 | TPS73225DBVR | CustomLib:73225 | U11 |
| 1 | TPS73233DBVT | CustomLib:73233 | U7 |
Questions
How big is the Eeg PCB?
It measures 45.5 × 52 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Eeg use?
73 parts, built around the ADS1299IPAGR, TPD4E1B06DCKR-TP, LM2664M6 and TPS73225DBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eeg KiCad files?
From the jwmke/eeg repository on GitHub, at the commit this page was made from: the board is PCB/PCBs.kicad_pcb and its schematic PCB/5Vto-2V5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eeg design in my own project?
Its repository states no licence, so its author keeps all rights: ask jwmke before reusing the design.
More from jwmke/eeg
1Similar boards
- 2 layers89.9 × 42.7 mm
Monolith
Monolith-BCI/Trillium-PCB
We're a group of teens working on creating a BCI PCB to start running our own experiments on noise filtering, signal processing speed, and data collection.
89 parts5 - 4 layers80 × 54 mm
- 2 layers66.9 × 41.5 mm
EEG v2.kicad Auto pcb
aaronadamski/brainsolutions-eegboard
EEG Prototype Board for UCI Senior Design
115 parts - 4 layers61.3 × 61.3 mm
- 8 layers245 × 129 mm
- 4 layers61.4 × 61.3 mm
Cyton wired
BostonUniversitySeniorDesign/brain-4ce
Where thoughts become motion. Designed by BU ECE 2023 Senior Design Capstone Team 4 From left to right: Brendan Shortall, Mitchell Gilmore, Dayanna De La Torres, Jonathan Mikalov, Alexander Johnson
100 parts3 - 2 layers220 × 50 mm
NeuroVox v2.0
Swapnil007-Curious/NeuroVox-v2.0
NeuroVox v2.0 is a conformal 220×50mm forearm wearable PCB. Powered by an ESP32-S3, it captures high-res 4-channel EMG via AD8232, INA333, and ADS1299 ICs using leadless, integrated dry Ag/AgCl edge electrodes.
94 parts3 - 6 layers7.5 × 1.3 mm
