2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269
2 layers95 × 40 mm
SpeedRadar
jwchang418/SpeedRadar2This project is designed by Jun-Wei Chang for a simple speed radar by using a few of electronic components.
- Size
- 95 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 39
- Pads
- 112
- Tracks, vias
- 170, 1
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jun 2020
- Updated
- 27 Aug 2021
Overview
SpeedRadar is an open-source printed circuit board by jwchang418, from the jwchang418/SpeedRadar repository on GitHub. It is a 2-layer board of 95 × 40 mm with 34 parts on 39 nets, routed with 170 tracks and 1 via.
It is built around the ATMEGA328P-PU and LM358. Its parts include 14 capacitors, 9 resistors, 4 connectors, 3 ICs and 1 diode. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
README
README.mdSpeedRadar
This project is designed by Jun-Wei Chang for a simple speed radar by using a few of electronic components.
Components list
here
Enjoy it !!
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C4, C6, C8, C9, C11 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5, R6 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C10, C12 |
| 2 | 10pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C13, C14 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C5, C7 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 100M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 16Mhz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | DC_in1 |
| 1 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | HB100-KiCAD-rescue | HB100:HB100_ver2 | HB1 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U3 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
Similar boards
- 2 layers99.3 × 98.6 mm
FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers55 × 485 mm
- 2 layers68.6 × 53.3 mm
- 2 layers68.6 × 53.3 mm
Avyduino
avycado13/avyduino
My take on the classic Arduino UNO. Powered by the same chips, but using a USB-C socket.
42 parts - 2 layers72 × 54 mm
- 2 layers127 × 125.9 mm
- 2 layers100 × 100 mm
Questions
How big is the SpeedRadar PCB?
It measures 95 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SpeedRadar use?
34 parts, built around the ATMEGA328P-PU and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SpeedRadar KiCad files?
From the jwchang418/SpeedRadar repository on GitHub, at the commit this page was made from: the board is Circuit Board/speed radar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SpeedRadar design in my own project?
Its repository states no licence, so its author keeps all rights: ask jwchang418 before reusing the design.